Smart card config help needed

**astral69** · 13-01-2009

I received my 7020S today and have managed the basic configuration for Hotbird and NileSat.

I now need to make it recognise the 2 smart cards that I have,
Irdeto and Viaccess.

I have put them in the two slots but cannot see how to activate them.

Help me please.

I am still on the standard sw release, but do plan to upgrade to Gemini
in the near future

**Analoguesat** · 13-01-2009

As you have a 7020 buy a compact flash card (1GB are dead cheap these days) and stick any other images you want to play with on the cf card.

Then if things go horribly wrong you switch off, pull the cf card out and reboot

You will need to allocated a cam to the services - dead easy to do, just stick a version of ccam as the default for the box.

**astral69** · 13-01-2009

What CAM sw do you recommend??

I am still on the basic Enigma, but do intend to update to Gemimi
as it seems highly recommended.

**Analoguesat** · 13-01-2009

Bit of a matter of taste really. Pli, Nabilosat and Gemini all have their advantages.

If you go down the cf card route you will also need FlashWizardPRO 6.3 to format the card.

**astral69** · 14-01-2009

I have 1 Gb flash card but the machine does not recognise it.
In fact it hangs during boot and has to be powered off and the card removed
before it will boot correctly.

The card is formated with Linux ext2

**HB13DISH** · 14-01-2009

Originally Posted by astral69

I received my 7020S today and have managed the basic configuration for Hotbird and NileSat.

I now need to make it recognise the 2 smart cards that I have,
Irdeto and Viaccess.

I have put them in the two slots but cannot see how to activate them.

Help me please.

I am still on the standard sw release, but do plan to upgrade to Gemini
in the near future

If you have a Viaccess CAM or Irdeto CAM, you can start by inserting it in the CI slot, then insert the respective smartcard, select Common Interface with the blue button (it will be the default anyway with the original image) and then select the channel and hopefully it will open.
The second smartcard will only work when you change the image and then select CCcam from the blue button.
I haven't been able to use the bottom card reader on my 7000S, hopefully you will have better luck with the 7020S
And welcome to the Dreambox club.

**astral69** · 14-01-2009

OK I got the card formatted with FlashWizard
and installed Gemini 4.5 but I am not sure that has got me anywhere yet.

Can't I use a SW CAM with the two card slots?
I want to be able to access both services without swopping cards,
or heaven forbid images. Even a $100 Openbox can do that,
why not the more sophisticated 7020??

I have placed the cccam files in the \usr folder on the CF card but cannot see how to activate them.

**HB13DISH** · 14-01-2009

Originally Posted by astral69

OK I got the card formatted with FlashWizard
and installed Gemini 4.5 but I am not sure that has got me anywhere yet.

Can't I use a SW CAM with the two card slots?
I want to be able to access both services without swopping cards,
or heaven forbid images. Even a $100 Openbox can do that,
why not the more sophisticated 7020??

I have placed the cccam files in the \usr folder on the CF card but cannot see how to activate them.

Try Blue Button >
When you see Common Interface on top of menu, scroll right or left
If you see only Common Interface, this means that you haven't installed CCcam properly.

**dig deep** · 15-01-2009

Of course You can use softcams for both cards.

CCCam will read them for You. If You downloaded cccam from the Gemini server it will be installed so You can use it from the blue button menu.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Smart card config help needed Dreambox7020 - Support for the Dreambox 7020 DM-7020 satellite receiver.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)