DM7025 boot problem | |
 |
| | Thread Tools | Display Modes |
| | |
| |||||||
31-07-2008
| #1 | ||
| Member Join Date: 03-02-2008 Location: midlands, england
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
My System: DM7025 85cm dish STAB motor |
I had a problem with my box where the video signal kept dropping out. I re-flashed it with LT4 via the network and all seemed fine for about a day then it went off completely. Now I can re-flash via the network or the serial port. It programs up OK. But now when I power up the box does not boot at all. The display sticks here :- dhcp... /flash/bootlogo.elf Any ideas out there? | ||
|  |
|
21-08-2008
| #2 | ||
| Member Join Date: 03-02-2008 Location: midlands, england
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
My System: DM7025 85cm dish STAB motor | I have resolved this problem at last.... :-) I suspected that there was a problem with the power supply so I got in contact with Dream Multimedia. On sending them the serial number and a description of the problem they came back and said it was a known problem with the power supply. The psu in my box is an old design. Anyway they offered to replace the psu with a new version as an exchange for the old psu. All I had to pay was the postage.. Good result...  | ||
|
| |
Linear Mode
