7025 config problems

champion

hi could some kind soul help me please i have a 7025+which i used to use in conjuction with my echostar to turn the motrised dish to diffrent sats my dish developed a problem so i had a disec moter fitted to do away with echostar i also have a 7020s when the fitter came he set it all up and working fine tuned in diffrent sats all fine looked quite simple so the next day i connected the 7025+ flashed new gemini image network is fine but for the life of me cant tune any sats or channels tried for days no luck searched the web no luck phoned the fitter he says he will sort it for £80 i dont want to pay again if possible please any ideas.

CROSSBONES

Your 7020 and 7025 are slighty different to set up. 7020 is enigma 1 and 7025 E2.

Here`s how to configure your 7025.


Configuration mode= Advanced
Voltage mode= Polarisation
Tone mode= band
Use usals for this sat = yes Make sure this is turned on for all sat positions
LNB= LNB 1
Diseqc mode= 1.2
Toneburst= none
Commited Diseqc command= none
Fast diseqc= no
Sequence repeat= no
Command order= commited, toneburst
UnCommited diseqc command = none
Diseqc repeats= none
Longitude= Enter your coordinates
Latitude= Enter your coordinates
LOF = universal LNB
Increased voltage= yes

champion

thanks for taking the time to help does the dish need to be pointing at a paticular satalite when entering these settings

champion

hi i put them settings in but to no luck no movement from dish is there any settings that allow me to move the dish to tweak the signal strength manually

CROSSBONES

You can fine tune the dish from the positioner menu.

If you have entered the correct long and lat settings for your area, the dish should move to the selected sat.

champion

hi that was what i assummed i live in the manchester chorlton area the settings i have entered are latt:47.217 long :29.110 if that is correct then i think there is a fault with the reciever could you just clarify what the long and latt should say ie north,south,east or west thanks again

CROSSBONES

with dishpointer I get the following for your location.

Latitude: 53.4369°
Longitude: -2.2663°

try entering these

champion

eurica ! your the man that was the problem i had the wrong long add latt settings when i entered yours the dish found the sats and tuned the channels much obliged thank you very much for your time and help

CROSSBONES

no problem mate, glad you got it sorted