Titanium Recovery Tool

**rolfw** · 16-04-2004

This utility has had a fair degree of success, but of course you use it at your own risk.

Translation of Readme

Good, the purpose of this small program is to try to recover the ATR to those cards that are it "lost". The program which does is to make a Reset to the card, and next send the same Worm that envia the SorryShackes, that is to say, makes just like if him dieramos to the flechita and the Disable (but with this metodo but the probable thing it is that it leaves a callus to us). The ATR Resureccion estara sending the Worm and making the Reset, until the ATR is the correct one. Once of correct ATR, the program will stop, and you dira that the card has recovered. Greetings East NaSeR P.D. program is even a Beta, if encontrais algun failure or what is, please to say it to me.

monuser · 22-05-2004

Tank you up up

TazzMan · 24-05-2004

Sorry to say that but these Tool dose not work with some cards.I have a Blue tit and it dose no help for me.
Best Regards
TazzMan

brainsuckor · 24-05-2004

HI i get an error :
system error & H8007007E (-2147024770) cant find modul ? (Das angegebene Modul wurde nicht gefunden)

plz help me i use xp

pipposso · 04-06-2004

home many guasanos try the prog and what is the difference between the two xtal??

Pity · 07-06-2004

This software WAS used for recover the ATR in Nagra Rom3 cards.

It does not work with Titanium Cards.

It is not useful any more...

Pity

**rolfw** · 07-06-2004

Seems strange that 5 people have voted that it has worked with their Titanium.

Pity · 09-06-2004

I'm Sorry, but it's true.

This does'nt mean that sometimes it works.

The ATR resureccion.exe was made to automate the string that the program Sorry Shakes 3.1.1 sends to the Rom3 card whet it was update to the version 377:

ROM 3 DISABLE BUGCASTERS and then RESET.

Sometimes you need to push those buttons hundreds of time to recover the ATR from the card.

Probably the string it sends to the card could recover an ART form the titanium, but i think that it is impossible.

Jeff Laing · 13-06-2004

I am unable to use this recovery tool because my port com is No 3
what can I do?

Regards

Jeff Laing

annimal · 20-06-2004

ive uses the dinamite software that seems to do the trick to

**rolfw** · 20-06-2004

Do you have a link for it annimal?

**T24** · 29-08-2004

Thanks to mohsintunsi

In the little recovery proggy (I have the spanish version); you have to check the right com port (1 or 2) to which your programmer with titanium is plugged and select the phoenix mode 3.68. The readme text isists that it has to be 3.68 and not 3.57. Then; all you have to do is start the recovery by clicking "rescucitar" ("recover") and wait until the program stops. The text says the recovery is not guaranteed but it shouldn't take more than 3 minutes. Give it 5 to be sure. Then try to erase your card. If it doesn't work with Titanium prog 1.10.2, try earlier versions. Mine was finally successfully erased after three or four trials with various versions. Good luck!

cocco · 29-09-2004

no resurection

bundu · 03-10-2004

I mistakenly thought I had a problem with my white titanium's ATR (it was brand new), as I couldnt find any OS or ATR using the 1.10.12 progger. So I tried running this recovery tool and now I have what seems to be an infinite number of different ATR's on the card. I've been erasing for hours now, using TMB 2.6, and have gotten virgin state lots of times, for different ATR's (OS 0, 9.4, 0.8). But I still cant program any files onto it, and at the moment I just continue erasing in the hope of finally resetting the card. Consider this a warning, but help/recommendations are also very welcome. Btw, TMB is the only progger I've found that can erase, though the bananaprogrammer can identify ATR, Oh yeah, I am using a smartmouse /phoenix programmer with 3.58/phoenix setting.
bundu

**guinness** · 12-10-2004

i download the Dynamite programmer!!!does work with the infinity phonix??been trying but not luck!hope some one can help resolving the no atr problem !thanx

cheewahl · 13-10-2004

My Tit card as dead as before.............

Alberto · 29-10-2004

necessito flash nagar portugues titanium

**geemac** · 04-11-2004

Didn't work for me i'm afraid, still no atr on blue tit

tigerss · 18-11-2004

hope it works

jeallen01 · 18-11-2004

Hi Folks

Does this work with White Tit cards?
[I have two which will no longer programme - whilst my two Blue ones are fine]

Thanks in advance.

John A

**rolfw** · 18-11-2004

I believe that it should work on either, but as mentioned earlier, it is a bit hit and miss John.

jeallen01 · 21-11-2004

Originally Posted by rolfw

I believe that it should work on either, but as mentioned earlier, it is a bit hit and miss John.

Rolfe

Thanks - I'll give it a try on one of the cards.

Nothing by trying!

John

AK-47 · 22-11-2004

i try to use this program today on my crashed blue titanium card ... And i can tell you it workes fine ... my titanium i working again ....

mmikey · 08-12-2004

I had a Blue Tit card. Tried to erase it with Multiprog 1.8 and Cardproggers of different versions- from 1.[1].10.0 to 1.[1].8.1 - no success, "Unsupported OS found", "No ATR", progger hangs up forever and worked all night, using Centrino 1.6 of my IBM notebook 98%.. I think it's dead, but tried a program from AD teknik site- MP test diagnostic tool. It says- ATR OK, 3B 24 00 30 42 30 30, all other OK, too, except "Fail to send 1+7 bytes". What should I do?

mmikey · 09-12-2004

I found an queer thread in this theme:

"...I suspect you have confuse your Titanium card with DSTC's research project called Titanium. While the DSTC's project - Titanium has been involved in developing new smart card technology, we do not sell nor offer any smart card with our developed smart card technology.

In answer to your question, a card's ATR can be easily retrieved by just about
any smart card diagnostic tool available. Most smart card readers I know also
included such diagnostic tool. In your case, if you require just the card's
ATR, then you probably find it easier to look what's available under your
smart card reader's driver.

Cheers,
Eddy"

---------- Forwarded message ----------
Date: Wed, 14 Jan 2004 15:40:21 +0100
From: Eugenio Diaz <redersys*cetib.ictnet.es>
Subject: TITANIUM CARD

I have a TITANIUM CARD v 1.02, that I lost de ATR.
When I tray to open whith the Phoenix programer no recognize the tarjet
because do not appears the ATR.
I tray to make MOSC which a program bat I dont have results.
PLS help me!
What I mast do !
Sincerely

View Poll Results: Did the Titanium Recovery Tool work for you?
Yes	16	47.06%
No	18	52.94%
Voters: 34. You may not vote on this poll

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)