conecting Smw X Line Lnb,with Hirschman Polarizer csp 1210,to Fibo?

**Turok** · 19-09-2007

Hello!

,today,i have,some special technical questions,to the comunity,that are unaswered in my mind,at the moment!

on,the net,i found,this,nice pictures,of an fibo antenna setup,in tokyio,that has conected the,smw x line lnb,ofer,the hirschman polarizer 1210 c,to fibo antenna,after,a long search,i found this rare polarizer,but,know i have the problem,my x 800 lnb seems to be,a little bit difrent versions,then,the pcitures on the net,on the label,i see xline type E

i have xline x 800,now the problem,when you look,at the pictures,the ends,looks difrent,,and i cant conect,it,the the polarizer,i contact,smw,with this questions,but the only aswer was,contact,your local satdealer,haha very funny,no one here,knows the aswer,now i want to know,what is the name,of the other conection norm,that the end,of the lnb has,smw xline has wr 75,someone told me on board,a week ago,but how called,the other conection standarts,that is on the other side,of the hirschmann polarizer,is there,any special conector,avalaible,for inside conection,that i can use,this polareizer,with out buying new expensice smw lnb,other posibility is,to buy,smw mechanical polareizer,but what kind of modell,should i take,maybe there also all out of producktion,i heard,the hirschmann csp 1210 has,the best performance of all,so i need an adapter ,to conect,the to standarts each other,and the water protektion ring,very important,where i can,find,this rar stuff,these days?
no one,can give me the answer...
so,what would be the chepest option?
--------
sorry,for unsharp pictures,with my sony f717 digitalcamera 5 mpixel,i always have the problem,when objekt is to near then it is unsharp,manual focusation does not help,maybe my camera has a vault,objekts and picutres,far away are good...

**Turok** · 19-09-2007

Picutures Part 2!

**Turok** · 19-09-2007

3.
my smw xline 800 lnb

**Llew** · 19-09-2007

SMW have a C120/C120 adapter which mayprovide a hole pattern match the Hirschman polariser.

_http://www.smw.se/res/pdf/feedhorn.pdf

All SMW LNBs have the same four hole pattern. I have an SMW ferotor polariser (magnetic). They never manufactured a mechanical model. Transmission loss 0.2dB. Hirschman loss less than this?

Llew

**Snuffer** · 19-09-2007

That polarizer have a special feedhorn made for Philips.

This feedhorn have the same end as the polarizer and no part that must inside it's 1 part feedhorn and flange.

This connection are diverance and are not correct you must have this part (see photo) for that polarizer.

**Turok** · 19-09-2007

Hi!
thx,for intresting information!
is,this shematik now,the smw modell,or another?
on the label itself,i dont see any information,about db lost of the hirschmann,there was,i freqency diagramm included,but i still not find,this paper at the moment,also i have no technical datasheet,

also have magnetlical hirschmann,but i heard,that magnatical polarizer,can freeze,when its cold outside
does philiphs in the past,also maka polarizers?

okay, i try to get this stuff,on some fibo pages on the net i read the smw x 800 performs best!
is the ring for water protection,in the smw kit,also included?

**Llew** · 19-09-2007

O- rings are always provided by SMW with their interfacing products -polarisers, 1/4 wave transformers etc.

If you haven't one supplied with your Hirschmann polariser, you will have to obtain one.

Magnetic polarisers have no moving parts, so won't be affected by the weather regarding polarity adjustment.

Llew

**Snuffer** · 19-09-2007

There must also a plastic plate look at the picture

"Magnetic polarisers have no moving parts, so won't be affected by the weather regarding polarity adjustment "

O have you ever open this type ???? There is a rubber ring inside to close the 2 parts and yes the coppr inside can be freeze so if you do a revision not to mucht lubrican inside where that copper pin is.

**Snuffer** · 28-09-2007

@ Turok

I found here in the old stock a brand new polarzir from Philips like on the picture's

If you will have it send me a adress i send him to you.

Ron/Snuffer

**Turok** · 28-09-2007

hello Ron!
sounds,great,thx,for help

i just,send you a p.m!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)