Jeager 1224 EL with 1.2 Fibo

**Snuffer** · 27-11-2007

I will have a 1224 EL for a 1.2 FIBO are there members here have that and how is it works?
I can buy the Jeager 1224 EL new for 160 Euro's is that intrested or??

**Turok** · 27-11-2007

I i have this installed,on a gilbetini mount!
i must search pictures on my external usb 1 terabyte hd,there are so many,so i dont know how long it takes until i find

you must also mofify the whole in the plate it self,in orginal you cant fix it
the problem what i have my motor blocks @ 68 east,.all limits in motor are removed,specification says,it should go to 80e,but it hangs,i dont know why,also the main problem i have i use a gibertini mount dont have the orginal fibo for 1,25 m,and i can only move from 8w to 28,5 then the declination is wrong in eastern and western satelites,with out montery 140 it is very hard to find the satelite,the problem i have on the mount of gibetini i dont see any delclination scala,so it is imposible to setup the system,coz i have no orginal fibo mount for my antenna,dual axis systems,are much more dificult to set up,with out declination scala,and help i think i will never solve the problem,wehn i find picutres i will email to you!
but without modifaction of the complete adpter plate,you cant fix it on the antenna!

**Snuffer** · 27-11-2007

But there is a special plate for it 29 Euro thats ncluding .

SO i must think of i do that haha
Keep the oldest system for it here now.

**Turok** · 27-11-2007

yes sure,but also this adapter plate,is not 100% compatible,and the distance ,to fix the bolts are difrent ,so you must make on other places,then it works!
when i find picutres i email to you!

**Turok** · 27-11-2007

Hi Snuffer!
Good news,
i found it !
here are the pictures now,of my setup!!

***CROSSBONES*** · 28-11-2007

Some nice pics Turok! Thanks for posting

Did you have to bend the c/master adaptor plate? As it bends at the rear of the dish.

**Turok** · 28-11-2007

Hi!
no i have no cm adaptorplate yet,where i can find one?

**Snuffer** · 28-11-2007

That plate are in stock in Germany 19,94 Euro.

Look at sat....24

**olisun** · 28-11-2007

Originally Posted by Turok

Hi Snuffer!
Good news,
i found it !
here are the pictures now,of my setup!!

According to the pictures, there is a another adapter plate which has been bolted to the dish and the 1224 adapter.

I had asked the same question some time back regarding the adapter plate.

Turok: Did you buy a seperate adapter plate fitted on the dish or did you have to make your own?

***CROSSBONES*** · 28-11-2007

Hi!
no i have no cm adaptorplate yet,where i can find one?

You have the CM adapter on your dish, there is also another plate bolted onto to CM adapter plate.

Did this come with the 1224? As it seems to be angled along the dish`s contour.

**olisun** · 28-11-2007

Originally Posted by CROSSBONES

You have the CM adapter on your dish, there is also another plate bolted onto to CM adapter plate.

Did this come with the 1224? As it seems to be angled along the dish`s contour.

If I can find that adapter, then my problems are solved...

***CROSSBONES*** · 28-11-2007

I think that the extra plate is the fibo adapter.

As with all fibo parts, no longer made any more!

How long ago did you buy the 1224 Turok? Did all the metal work come with the 1224 motor?

**Snuffer** · 28-11-2007

Olisun

Look ad satshop24.DE there you see that plate

**olisun** · 28-11-2007

Originally Posted by Snuffer

Olisun

Look ad satshop24.DE there you see that plate

if you are talking about this place then I already have it.

Where did you get the plate which is attached to the dish and the plate in this link?

**Snuffer** · 28-11-2007

Please chech the second link its the same as 1e

**olisun** · 28-11-2007

Originally Posted by Snuffer

Please chech the second link its the same as 1e

Ignore my previous post.

Not sounding to be rude, but me and Crossbones have asked the same question but you have failed to answer that.

From Crossbones post

"there is also another plate bolted onto to CM adapter plate.

Did this come with the 1224? As it seems to be angled along the dish`s contour."

THE PLATE BETWEEN THE DISH AND THE CM ADAPTER PLATE.

***CROSSBONES*** · 29-11-2007

Olisun

Look ad satshop24.DE there you see that plate

That is the CM adapter plate

We would like to know where to get the 2nd plate.

Turok please help!

**Snuffer** · 30-11-2007

Sorry i see now what you meen.
That plate is the problem ok.

Perhaps we can use that plate of Turok to make it for us.
If he can give the plate or can make a picture with all info on it i make some of them here for them that will have it.
What about that????

**olisun** · 30-11-2007

Originally Posted by Snuffer

Sorry i see now what you meen.
That plate is the problem ok.

Perhaps we can use that plate of Turok to make it for us.
If he can give the plate or can make a picture with all info on it i make some of them here for them that will have it.
What about that????

I am all for it

***CROSSBONES*** · 30-11-2007

Perhaps we can use that plate of Turok to make it for us.
If he can give the plate or can make a picture with all info on it i make some of them here for them that will have it.
What about that????

Yes that is a great idea, post some measurements up for us.

**Turok** · 01-12-2007

Hello !
sorry,was not @ home

was in my sisters house,and then i have no time,for the internet !

i bought the everything complete in set!
not speratly
,2 years ago,was the last antenna in stock,now the dealer closed his strore,he told me that is the orginal adapter plate from jager,maybe it was not true,never seen the channel master adpter!
so contact jager in taiwain,they must have this part in stock,its part of the EL 1224 System,you only must make the holes,on other places,otherwise,in orginal you can fix it,in iron factory,the do it for me within 5 minutes,2 years ago,then it works,but the problem,with the wrong mount,is always be there,without orginal fibomount and scala,of declination,my dual axis system,will not work like it should be!
in eastern in western satelites,seems to be no one here,to help me to solve this problem

maybe i find a orignal fibo mount for 1,25 m,and then it should work!

on jäger motors i heard,that the have change the production from taiwain to china,now the newer models,are lower in quality,coz inside everything is plastic,and not good quality like the older ones,can anyone confirm this?

sorry i cant go to the roof ,to measure,bacause iam not free from gidiness!

**olisun** · 02-12-2007

Originally Posted by Turok

i bought the everything complete in set!
not speratly
,2 years ago,was the last antenna in stock,now the dealer closed his strore,he told me that is the orginal adapter plate from jager,maybe it was not true,never seen the channel master adpter!
so contact jager in taiwain,they must have this part in stock,its part of the EL 1224 System,you only must make the holes,on other places,otherwise,in orginal you can fix it,in iron factory,the do it for me within 5 minutes,2 years ago,then it works,but the problem,with the wrong mount,is always be there,without orginal fibomount and scala,of declination,my dual axis system,will not work like it should be!
in eastern in western satelites,seems to be no one here,to help me to solve this problem

maybe i find a orignal fibo mount for 1,25 m,and then it should work!

Which adapte plate are you talking about?

**Turok** · 02-12-2007

Hello!
in the jager 1224 EL Set,there was a black adapter plate included,that conects the motor,and the antenna backside,of the mount!
in orginal,the holes,are at the wrong place,so you cant fix it on fibo,without modification,and making new holes!

for most antenna types like gibertini etc ,modification is nesersary!

jager could make a lot of money,when do whould also made this adapter plates for serval antenna types!
every antenna and mount is difrent ,thats the problem,also maybe difrents between older and newer series!.of difrent motor revisons ,i dont know,but i could imagine this!

**olisun** · 02-12-2007

Originally Posted by Turok

Hello!
in the jager 1224 EL Set,there was a black adapter plate included,that conects the motor,and the antenna backside,of the mount!

Yes we all know about that, but in your picture there is another plate which is connected to the dish and the 1224 adapter plate.

Where did you get that plate???

**Turok** · 02-12-2007

hello,this other plate, was also included when i purchase the antenne in complete set,dont have any infos about it,maybe its from channel master,or gibertini,selfmade product by a german satdealer,coz the mount is also from gibertini!
would be great when more satelite dealers ,would make self made construction,i like this!
but the reason,that is complex to made,in mass production,would also be the reason,that not many dealers will ofer special solutions..

gibetini,is a mass market antenna,fibo not...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)