feed horn C120 adapter

RobertM60

looking for Fibo lnb c120 - feed-horn adapter
any sugestions ?

Robbo

Is this what you mean?

C120 Lnb

RobertM60

Yes thats the part i need.
where can i get it in germany ?

dorsetbob

HI RobertM60

Try this post
Fibo 90cm Dish Fixed Mount Bracket

This is an alternative way with a Hirschmann.
Worked for me!!

Bob

pedro2000uk

If you don't get fixed up, we are getting some C120 flanges made. If you can give me the dimensions of the body of the adapter (ridges etc) and how it fits into the horn, we should be able to put one together to fit the Fibo horn.

Snuffer

I now a shop that seell it i can send you this FLANGE, price are 23 Euro without transport.

RobertM60

Hi Snuffer

tanks for your offer , will send you a PM .
Has this shop a webpage ?

Merci

dorsetbob

Try here _http://www.internet-sat-shop.de/shop/product_info.php?cPath=22_33&products_id=1767
All you need to do is cut off the feedhorn and you have a c120 adapter.
I did it myself and it works perfectly.
Hope it helps.

Bob

kamaleon

Sure,

Try here:
_http://satmueller.de/ costs 18€ plus 10€ shipping inside Germany
_http://www.seh1.de/angebote.asp
_http://www.fernseh-panzer.de/ 18€ and shipping inside Germany is cheaper than Satmueller, you should give them a try. They usually reply pretty fast.

I also have a contact in France and Snuffer has adapters in Holland.

These are all original fibo C120 adapters, otherwise you can go Dorsetbob's way and butcher something that will fit.

On the same shop that Bob has shown there's a 90° angle adapter but it's outrageously expensive:
_http://www.internet-sat-shop.de/shop/product_info.php?manufacturers_id=&products_id=176 5

Regards, kamaleon

pedro2000uk

What f/d ratio are those feed horns .. I take it .6? and would swap with asc feedhorn?

dorsetbob

Looking at the box it came in and the instructions there is no mention of the f/d ratio.Not that I needed it as the feedhorn on the Fibo is in a fixed position.
It is supposed to be for a CAS5585F feed adapter and from what i can see you need a 25mm clamp.
Can you swap with asc? I don't know.
There is not much information available about them.
Perhaps Falconsat would know,that's were I bought it.
I can scan the instructions if you need them.
Just ask me.

Bob

pedro2000uk

Thanks Bob...

that number refers to the lnb holder on the manufacturers site...

is this it ....

_http://www.falconsat.co.uk/hirschmann-csa850a-feedhorn-p-435.html?osCsid=r9ln0bn5lnte8n70v0nsgmqh33

dorsetbob

That's the one!!!
I can scan the instructions that came with it if you need them.
It's got some dimensions and full instructions on how to install.

Bob

pedro2000uk

Thanks..

I think a few people might like to see that and if it could be used as an alternative feedhorn for dishes like asc/Andrews/Channel Masters etc.. instead of the asc feed horn. It's certainly a lot cheaper.

dorsetbob

This is what came in box

http://i733.photobucket.com/albums/w.../th_csa850.jpg


Bob