FortecStar Passion HD

tjl · 01-01-2009

Originally Posted by Donald

Purchased Passion+ just before Christmas and, although pleased with quality, don't understand why I am not receiving all the regular channels. Am missing, BBC 2, 3, 4, some ITV channels (namely for my region East Anglia) as well as Channels 4 and 5. Any ideas on how I can add them to the Channels available?

Also, the TV or Programme Listing doesn't seem to come up as it should. It shows what's on at the time you look at it but no forward information. Again, any help out there?
Thanks in advance
Donald

Donald read this link through as it helped me when I first purchased this system and it helped a memeber in the same position as yourself a couple of weeks ago,it seems it is a noted problem with this set up but the lack of info that comes with the system leaves this important fact out,dont be put of by the name change in the post as this was a mickey take on the name due to the prob

http://www.satellites.co.uk/satellit...nb-fckuvn.html

....

Tony

Donald · 01-01-2009

Originally Posted by tjl

Donald read this link through as it helped me when I first purchased this system and it helped a memeber in the same position as yourself a couple of weeks ago,it seems it is a noted problem with this set up but the lack of info that comes with the system leaves this important fact out,dont be put of by the name change in the post as this was a mickey take on the name due to the prob

http://www.satellites.co.uk/satellit...nb-fckuvn.html

....Tony

Thanks Tony. Based on your useful link, think our problem may be alignment of the satellite dish which we already had and were using with SKY (not a subscription service but all our own equipment). When weather bit more amenable will get up there and adjust dish.
Donald

**Bbigfoot** · 02-01-2009

Hi All,

@mick2me...Im not up with the Passion + yet, just had it on a couple
of times, but one thing I have noticed with it is, If you have a cam in and
its not upto date with keys, you reciever shows No sig quality and No Sig strength.
The Passion + just flatlines, Ether pull out cam, or put an up to date
Bin file.
That was the case with intelsat (1w) (DigiFilm 1) No Signal, loaded new
Keys Digitv light Up. Another Glitch was, No upto Date Keys and the Passion+
would Not Initialise the Diablo Cam.
You could pull out Cam and put it on to a Thor FTA Channel, you should
pull in a Sig then.

Hi all, Can anyone point me as to were I can Download a Free Program (tool)
to Burn a HDD Recording from the Passion +,To DVD or DVD-RW or DVD+RW
so I can pass the Disk on to anyone with a DVD Player.

BF...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

FortecStar Passion HD High Definition FortecStar HD satellite TV receiver help and support forum.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)