Scanning for HD Channels | |
![]() |
| | Thread Tools | Display Modes |
![]() | ![]() |
| | #1 | ||
| Member Join Date: 12-12-2004 Location: Ireland
Posts: 21
Thanks: 5
Thanked 0 Times in 0 Posts
My System: Fortec Star Passion HD Dreambox 7000 1.1 Motorised Dish Diablo 2.3 |
I first scanned Thor and a few other satellites and my Fortec Star Passion will not pick up the HD channels. I then entered all the required information manually using the remote which failed and then Setedit which also failed. Is there a reason for this as I had a problem getting ITVHD to setup but eventually got it with manual settings Last edited by vulmac; 25-05-2008 at 10:56 AM | ||
| | |
| | #2 | ||
| cerca trova... Join Date: 01-01-2000 Location: East Anglia
Posts: 4943
Thanks: 17
Thanked 238 Times in 221 Posts
Blog Entries: 1 My System: Triple Dragon with HDD/USB stick, Humax HDCI2000, Echostar AD3000ip & SR8700, Fortecstar 5100CIUltra, Aston Simba, RSD ODM300. Swedish Microwave 1.2 Motorised dish / Invacom C120 twin LNB driven by the AD3000. 3 other fixed dishes. Diablo/Mrev Cams ![]() Fighting the evil 3 Dragons under the Don Quixote banner,Sir Llew persevered where others failed | Which HD channels? When you say 'pick up', do you mean you can't view the FTA or encrypted ones or they don't appear in your scanned list? | ||
| | |
| | #3 | ||
| Member Join Date: 12-12-2004 Location: Ireland
Posts: 21
Thanks: 5
Thanked 0 Times in 0 Posts
My System: Fortec Star Passion HD Dreambox 7000 1.1 Motorised Dish Diablo 2.3 | No they do not appear on the scanned list. The ones I was looking for were Discovery HD and Kanal 5 HD on Thor and any others available. I am using the latest firmware and loader for the Fortec Star. Luxe Hd is ok as is BBC HD ITVHd on 28 East. Premier Hd and Discovery HD are ok on 19 East .I cant figure why the scan is not picking up the others as the frequencies are there in the list of transponders. | ||
| | |
| | #4 | ||
| cerca trova... Join Date: 01-01-2000 Location: East Anglia
Posts: 4943
Thanks: 17
Thanked 238 Times in 221 Posts
Blog Entries: 1 My System: Triple Dragon with HDD/USB stick, Humax HDCI2000, Echostar AD3000ip & SR8700, Fortecstar 5100CIUltra, Aston Simba, RSD ODM300. Swedish Microwave 1.2 Motorised dish / Invacom C120 twin LNB driven by the AD3000. 3 other fixed dishes. Diablo/Mrev Cams ![]() Fighting the evil 3 Dragons under the Don Quixote banner,Sir Llew persevered where others failed | Kanal 5 HD may be off limits at your location - do you receive any other channels on the 12.399H TP? | ||
| | |
| | #5 | ||
| Member Join Date: 12-12-2004 Location: Ireland
Posts: 21
Thanks: 5
Thanked 0 Times in 0 Posts
My System: Fortec Star Passion HD Dreambox 7000 1.1 Motorised Dish Diablo 2.3 | No nothing showing up on it. I had Discovery HD on Thor I had to enter all manually and it was working ok. I was having problems with the motor and done a factory reset on the Passion. Now I cant remember where I got the instructions in the first place. | ||
| | |
| | #6 | ||
| Member Join Date: 12-12-2004 Location: Ireland
Posts: 21
Thanks: 5
Thanked 0 Times in 0 Posts
My System: Fortec Star Passion HD Dreambox 7000 1.1 Motorised Dish Diablo 2.3 |
I spent two nights adjusting my dish to get the Thor signal a little better. It did not make a great deal of difference. I decided to check my lnb to see could I get a better one with a lower signal to noise ratio and there was the problem. The collar holding the lmb in place had sprung slightly open . I took the lnb off inserted it into the collar again problem solved. All HD channels scanned in. | ||
| | |