Fortec - Diseqc - v150 | |
 |
| | Thread Tools | Display Modes |
| | |
| |||||||
09-06-2008
| #1 | ||
| Member Join Date: 08-06-2008 Location: Wales
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
My System: FortecPassionHD, QualitvQS1080IR, VantageX201SCI, Motorised 1m dish, 8w to 28e |
I bought the FortecPassion HD a couple of weeks ago. My disecq worked the dish motor perfectly. I then upgraded the box to the new v150 firmware. The diseqc is now erratic. Sometimes it moves east or west. Sometimes it doesn't. The Nudge east/west is now hardly working. If I do a 'nudge' I have to count 5 seconds before having any hope of doing a follow up 'nudge' on the dish. I post this in hope that Fortec engineers recognise there might be a bug and consequently issue a fix. | ||
|  |
|
06-07-2008
| #2 | ||
| Member Join Date: 12-12-2004 Location: Ireland
Posts: 21
Thanks: 5
Thanked 0 Times in 0 Posts
My System: Fortec Star Passion HD Dreambox 7000 1.1 Motorised Dish Diablo 2.3 |
 I had this problem with Diseqc and it was driving me mad. I thought it was the motor. The dish would sit on one satellite and would not move. The way I got out of it was to disable all limits in Diseqc and press go to satellite. I then set to USALS and as long as I did not set any satellites to Diseqc it works ok. To get a better signal if your dish is a little off line adjust your latitude and longitude settings by a degree at a time to get the best signal. I found this saves me having to get up and readjust the dish. Sorry for not seeing this earlier as I was on holidays | ||
|
| |
Linear Mode
