Fortec Star Passion HD loader v.15

terencejames

I have a Fortec Star Passion HD box and have just uploaded the latest V1.15 loader and new firmware.
it worked fine with the 1.14 version but now the loader simply doesn't load.
Can anyone tell me how the revert to the 1.14 version or give me a link to get it.
The box lights up and the Loader V.15 shows in the pane but the HDMI shows no signal and the machine will not respond to the remote control.

thanks,
terry sheppard

Llew

Moved to the Fortec Passion HD section.

Try loading again by this method -

Switch off the box, plug in a USB stick with only the v.150 loader file on it and switch back on. You should get 'file read' on the front display, then 'file 1'. Press the box's 'OK' button and you see '1 Loader'.

Press OK again and it should go through the loading sequence and end with 'Power off'.

Switch off the box and remove your stick. It should now boot up with the loader, after which you can load the firmware.

Here's v.140 if you need it -

Attached Files

loader_v140.zip (191.5 KB, 73 views)

Celebrating Ten Years Of The Forum As A Founder Member