Octo LNB output in CyprusIf you live outside the reception footprint of a satellite and would like to, or can already receive services, post your questions or information here. | |
 |
| | LinkBack | Thread Tools | Display Modes |
| | |
| |||||||
Octo LNB output in CyprusIf you live outside the reception footprint of a satellite and would like to, or can already receive services, post your questions or information here. | |
|
| | LinkBack | Thread Tools | Display Modes |
30-06-2009
| #1 | ||
| Member Join Date: 30-06-2009 Location: Cyprus
Posts: 2
Thanks: 1
Thanked 0 Times in 0 Posts
My System: Prime 2.7m dish Invacom C120 Quad LNB Pace DS430N receiver |
Hi, I have a 2.7m Prime dish with Invacom C120 quad output LNB and C120 horn in Cyprus. This system works well with all normal channels received here but I need to increase the number of outputs. Can anyone recommend the best solution? Is there an Octo independent output LNB that will work with this setup in this fringe reception area? If not, can anyone recommend a powered switcher unit and how to set it up? Many Thanks Pablodaddy | ||
|  |
|
30-06-2009
| #2 | ||
| Super Moderator  Real name: Mark Join Date: 17-05-2007 Location: Kent,UK
Posts: 4496
Thanks: 76
Thanked 635 Times in 602 Posts
My System: TM6800HD, TM1000, TM600 Linux,TM5200, TM2200 motor, Triax TD110 dish + Fortec 85cm. Meter=Satlook Micro+G2 NIT | You may run into problems finding a C120 Octo LNB, a c120 Quattro with a multiswitch is probably your best bet. Octo C120? | ||
| | |||
|
| |
| The Following User Says Thank You to Robbo For This Useful Post: | pablodaddy (02-07-2009) |
|
30-06-2009
| #3 | ||
| aka Skyman  Join Date: 13-06-2003 Location: Limassol, Sunny Cyprus
Posts: 1721
Thanks: 14
Thanked 58 Times in 54 Posts
My System: 3m(sky),1.8m(astr/hotbird),1m (nilesat)1m(arabsat)diseqc 4,sky plus,humax freesat,visionet 8000s,technomate 5400 ci+ usb super. Satlook nit colour + Horizon hdsm. wii  | Never seen a octo prime focus, yet , so I recommend an Inverto quattro and a Terra multiswitch with 10 or more outputs.( good to have a couple of spare outputs in case the output dies or someone decides on getting sky+. You probably will need a power supply near the dish( in a water proof housing). | ||
 | |||
|
| |
|
02-07-2009
| #4 | ||
| Member Join Date: 30-06-2009 Location: Cyprus
Posts: 2
Thanks: 1
Thanked 0 Times in 0 Posts
My System: Prime 2.7m dish Invacom C120 Quad LNB Pace DS430N receiver | Thanks for your advice. I suspected that a quattro with a multiswitch was going to be the only way but needed to be sure before I spend the money. I shall probably go with an Invacom C120 quattro and Vision V75-512S 12 output multiswitch. Anything other than a C120 LNB will mask too much signal here. Comments would be appreciated on this setup. Thanks again | ||
| Last edited by pablodaddy; 02-07-2009 at 09:31 AM. | |||
|
| |
|
| Bookmarks |
| Tags |
| cyprus, lnb, octo, output |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
