HUMAX HDCI-2000 thread

[rolfw]

Well I've looked at a couple of Humax and Pace receivers and the difference between SD and HD is not small, is your TV HD as well?

[good2talk]

Yes, my TV is HD ready. I get very crisp image even from built-in Freeview. Its a brillant TV. As I mentioned earlier Samsung gives excellent image but not Humax.

I have sent an email to Humax. Lets hope they will reply.

[johnsattuk]

I recently bought a Humax to dabble in HD, and am also a little dissapointed.

The HDMI into my Proj. is quite good, but I find that the SD pic. is not as good a pic. as my Topfield 5800, or my Dreambox or Relook.

I am feeding my panasonic plasma with the YUV signal, same as all my other devices, and find that the SD pic is over saturated colourwise, looking a bit poster paint. The HD pic fed to the pana is better than SD, even though the pana is not HD.
I dont want to mess with the settings on the pana, because that would upset the other sources, which are OK.

[good2talk]

johnsattuk, Please complain to:

tech-infohumax-digital.co.uk

Unless many customers complain, they are not going to release a new software to fix it.

They released BBC HD software only after many users complained about it.

[good2talk]

Originally Posted by jagost02 Good2talk, Trust me you will be impressed with, and find the HDCI-2000 a good investment even at the current prices. Dont forget to get a Dragon/T-rex for the extra bonuses . When I was looking up info on the Humax I coudn't find enough pictures of it. Once I get a chance I'll upload some. Regards, Jagost02

Sadly it is not a good investment. I was happy with my previous Samsung receiver. Humax is useless for me. Money wasted and I am taking U turn now.

[jagost02]

Originally Posted by good2talk Sadly it is not a good investment. I was happy with my previous Samsung receiver. Humax is useless for me. Money wasted and I am taking U turn now.

To each his own. I am like many others who are happy with their HDCI-2000. I did mention in my other post which we discussed deeply the differences of black levels between the HDMi and component outputs. It could be your TV inputs. I know that my 40" Samsung LCD TV handles its inputs differently depending on the connector HDMI vs. Component. Like I have said before the picture quality is amazing.

If you were happy with your SD channels then the HDCI-2000 wasn't going to do it for you unless you were really into the HD thing. I still say that the Humax is the best HD receiver that I have seen available at the moment (Quali-TV1080 & Pace).

Maybe your hopes were too high or a bad receiver... I don't know. Like I said I have had many receivers including the Dreambeox 7000s, 500s, Samsung SCI-702C etc... and am happy with this one.

Aside from BBC HD did you see any of the other HD channels? Did you try the TRex or Cerebro in it?

By the way Humax is a good comapny and they will release firmwares to correct/improve the outstanding issues on this receiver as they have done with others in the past.

Regards,
Jagost02

[Llew]

Anyone tried the new settings list yet? (Formula v.1.01)

Llew

[jagost02]

Llew,

I'll be trying it when I get home.

Regards,
Jagost02

[Llew]

OK Jagost02, will try myself later. Apparently it clears some bugs, like allocating the TP's to the correct sats after uploading.

Llew

[good2talk]

Originally Posted by Llew Anyone tried the new settings list yet? (Formula v.1.01) Llew

Where can I get this from?

[Llew]

It's available over on satdudez (HD receiver section)

Llew

Originally Posted by Shahid Here is the .fdf file which you need to upload to your box using The Official Humax Sat Editor named 'Formula NH' To get the .fdf file www.fileden.com/files/29802/HDCI2000final.rar NOTE: The above link is not a key or hack code. Its just a file to get the Premier Direckt Channels stored in the Humax HDCI 2000. Right Click Save as Do a System Restore and Scan Astra 1 Only Here are full instructions on what do . Set The Humax HDCI2000 on Astra 1. Switch of the HumaxHDCI2000 at the back. Connect a null modem cable betwen serial port PC and serial port of the Humax HDCI2000. Start the software "formula for NEO ver NH1.00" then load channellist HDCI2000final. click on "Download to STB" and switch on Humax HDCI2000 at the back. Be Paintent, wait a few seconds. Till is starts loading the file to the Humax HDCI 2000 Now you are ready to scan the other satellites (if you have them) Now you should have the additional Premier Direckt Channels in the Humax HDCI2000. If you had a Celebro Card working prior to Premier Package, then it will clear these Premiere direct Channels too. Hope that clears things up. If you are wondering what is Celebro Card. go here. http://www.satellites.co.uk/php-bin/...803#post381803 Regards Shahid.

thanks sahid,your file worked fine on my box,i just use a monoblock for astra and hotbird,for ages i hadn't even been able to run the updating tool [oak something],kept getting win xp auto exec errors,managed to fix that problem today and your file opened all the channels i couldn't find,even before when i clicked on unknown channel they weren't there,now they are all clearly labelled.
hard to tell which diseqc version i'm using,the monoblock is brand new,all i can say is it works on a system that isn't motorised.

[good2talk]

Originally Posted by Llew OK Jagost02, will try myself later. Apparently it clears some bugs, like allocating the TP's to the correct sats after uploading. Llew

Please help me if you can.

There is channel called Cee(i)TV on Hotbird 11727V 27500 3/4 that is free to air. The Humax can't view the picture for some reason it plays just the audio only where I tried with Technomate, Samsung & Echostar they all clear Video & Audio.

Could you, kindly try to clear this with new formula and let me know?

Thank you.

to follow on from what i said yesterday,the file worked fine at first,then i realised i could only get astra and not switch back to hotbird,pressed the remote and it wouldn' let me back to hotbird,also it thought i was using a motorised set up and tried to move the dish.
So i edited the channels myself with the humax formula software,just added the 20+ premiere channels individually to all my hotbird and astra channels that i uploaded from my reciever,process took a while to upload all the channels to the computer via the r232 cable,around half an hour,but the editing was easy enough,just used all sahid's figures in the editing and it's working fine now,as all the settings are personalised for my own box.

[Llew]

Originally Posted by good2talk Please help me if you can. There is channel called Cee(i)TV on Hotbird 11727V 27500 3/4 that is free to air. The Humax can't view the picture for some reason it plays just the audio only where I tried with Technomate, Samsung & Echostar they all clear Video & Audio. Could you, kindly try to clear this with new formula and let me know? Thank you.

Can't offer any clue as to why this channel doesn't clear, good2talk.

Checking the idents with Formula against those on my Triple Dragon, which clears that channel, all are correct, i.e. -

SID: 35BB
PMT PID: 0113
VPID: 0B2D
APID: 0B2E
PCRPID: 0B2C

A mystery indeed.

Llew

[good2talk]

Can't offer any clue as to why this channel doesn't clear, good2talk. Checking the idents with Formula against those on my Triple Dragon, which clears that channel, all are correct, i.e. - SID: 35BB PMT PID: 0113 VPID: 0B2D APID: 0B2E PCRPID: 0B2C A mystery indeed. Llew

Thank you very much for your reply, Llew.

I wanted to make sure, before I get rid of my Humax HDCI-2000.

Anyway, this receiver is useless for me!

[jagost02]

Originally Posted by good2talk Please help me if you can. There is channel called Cee(i)TV on Hotbird 11727V 27500 3/4 that is free to air. The Humax can't view the picture for some reason it plays just the audio only where I tried with Technomate, Samsung & Echostar they all clear Video & Audio. Could you, kindly try to clear this with new formula and let me know? Thank you.

I'll see what I can do. Its ashame you feel that way. I still am very happy with mine. What receiver are you looking to substitute it with?

Regards,
Jagost02

[good2talk]

I have gone back to my Samsung A300W for the time being. I will wait until some new HD receivers released.

Please have a look at the following link. Sony is coming with some new products. I may buy that one if it comes to European market.

http://www.digitalworldtokyo.com/200...i_recorder.php

[jagost02]

Originally Posted by good2talk I have gone back to my Samsung A300W for the time being. I will wait until some new HD receivers released. Please have a look at the following link. Sony is coming with some new products. I may buy that one if it comes to European market. http://www.digitalworldtokyo.com/200...i_recorder.php

Looks and sounds good. The price of 800+ euros will make the Dreambox 8000 look like a good deal also. If the Dreambox is your type of machine of course (Swapping images and card sharing).

Regards,
Jagost02

[rato]

Hay anyone tried to use the two CI slots at the same time? Do both of them work with CAMs inserted?

[jagost02]

Rato,

Good to see you around. From what I have read they both work. If you mix Cams it can be a problem at least a Trex and Matrix. But then again the Matrix never worked well with the Dragon.

Suposedly the Matrix ends up overriding the Trex. It happens with some other receivers so I guess its really a Cam problem.

Regards,
Jagost02

[rato]

Thanks jagost02 for the info. I only have one CAM(my T-Rex), so I haven't had the opportunity to test it with another CAM.

[zooma]

as i am too lazy to read the manual, i am hooking this reciever to my HD projector via HDMI, can i also connect this to my non HD TV?

[rato]

Yes you can zooma. Connect it to your non-HD TV input via scart.

[johnsattuk]

I have HDMI to my projector and YUV to my Plasma screen, works perfectly