how to update the keys in starsat recivers

kingofking

guys

how we can update the reciver keys utomaticaly without entering the manually.

Which hex file to use and from where i can get the updated one.

mumtazrizvi

Hi Dear kingofking

Good Afternoon

Go to STB setup and put 12345 either "00000" you should
get the Menu otherwise tell me the Model Number if I can
do something for you.

Regards

Mumtaz Rizvi

kingofking

thanks mumtaz for your reply, what i ment is that the file to use to upate the keys automaticaly using the dreamloader software and from where to find this file.

i know how to go to stp and enter 1234, but this called manual entring. did u got me.

my reciver is SR-130D plus

Digital2

Use the same method I explained here.
h**p://www.satellites.co.uk/php-bin/forum/showthread.php?t=42779%20)
The only difference would be, that you use the software that is meant for your model SR130. Good Luck

Digital2

Dreamloader is no more required if you have the New loader Version 2.24 (www.satsw.net) . Browse to the FLASH FILE (.BIN) or softcam_key_bin (dated May19 is the latest available) That puts in just the keys, instead of doing it manually.

kingofking

thanks Digital2 for your reply, will try it and c

kingofking

Digital2 what i want is that, u know some times the POLSAT and some other their keys change in a weekly babsi if not daily, so what i wanted is that to install the new keys automatically using the dreamloader, and i don't want to entering them manulayy using the TBS and 1234.

Thanks to adv if there is any file to use

westsider

hello,does starsat have softcam function?which models have?

amxson

Hai to all..
My receiver is starsat sr-x3200cu if you know about the upgradation of this.
I use emupgrade, irduptool,loader3.4 but nothing happen by using this cable
pin no 2 to 3,pin no 3 to 2,pin 5 to 5.
is there any other pins where connected or grounded
please help me

alvinturla

I tried last week to upgrade the sofware of SR-X3200CU Super from satdw.com and I was able to upgrade it by the use of the cable your are telling about which I purchased from the computer store RS233C. After that updating the softare, the receiver will reboot and you will see new designs of the programs. The only problem I encountered is, after updating, my smartcard IRDETCO Access with pay channel got lost, cannot detect my card, on the other way, I was happy coz' all the new channels has been downloaded after I used auto scan especially the Spice Platinum, Multivision & XXL which has been lost signal before upgrading the software. That's all I can share to you.

alvinturla

Can you explain to me how did you arrive to get the emupgrade, idruptool, loader 3.4 ? Maybe this will solve my problem. Anyhow, I explain on my previous mail how to get the correct sofware downloaded. Need more help just send me Email address removed

I will wait for your response how did you get the emupgrad, idruptool, etc. Can I have your email to exchange more ideas?