Matrix Reloaded CAM

Pandora · 02-02-2004

Just got at MR CAM and have a few questions:

The cam works without card, so why do people use 6in1 files ?

How do i update the keys ?

I tried inserting a viaccess funcard (not 6in1) but the screen did not clear, untill i took out the card... why cant the cam read the funcard ? Does the funcard have to be a special type ?

If i want to use a original Canal Digital card, can i use it in the MR CAM ? Or does the CAM need some special files loaded ? (using v. 1.06 on the MR CAM)

**jimbo** · 02-02-2004

Pandora

The MR is designed to decrypt channels without a 6 in 1 card. All done by software in the cam itself. It requires updating from time to time which can be done with 2 funcard 6's or 3 funcard 5's. It's necessary to download the software on to the funcards first of course. Alternatively the cam can be updated with a CAS interface. As far as I know the MR will decrypt Irdeto and Connax channles with legit cards.

Have a read through this site for all the info.

**waverider** · 02-02-2004

First of all you need to Initially load MR files 1.055 from the www matrixcam.com site, and as Jimbo has mentioned which can be done with 2 funcard 6's or 3 funcard 5's...this is done in your recievers setup menu with the MR inserted and should prompt you for card one etc!

Pandora · 03-02-2004

Originally Posted by jimbo

Pandora

The MR is designed to decrypt channels without a 6 in 1 card. All done by software in the cam itself. It requires updating from time to time which can be done with 2 funcard 6's or 3 funcard 5's. It's necessary to download the software on to the funcards first of course.

Have a read through this site for all the info.

Okay, this updating with cards, is that to update in case of code changes or what do the updates do ?

Alternative: How do i update the codes ?

**waverider** · 03-02-2004

Wether it be fun 6's or MR, files have to be updated on a regular basis...see Nobbly's links!

Po. · 03-02-2004

if you just want to update the keys then download one of the 6 in 1 files that says it has the mr keys with it.
now look in the text file to get the keys required.
now go throught your reciever menu to find the key foe changing.
enter the new key.
save and exit.
some times it is quicker to load your card as 6 in 1 and put in in the cam, but no AU.

you only need the multiple fun cards when you want to change the firmware in the cam.

po

**waverider** · 03-02-2004

Or alternatively and a lot quicker too is to program the MR in a laptop Ci slot....

Asterixx · 03-02-2004

I have a laptop and Ci slot.........how do you upload codes using the CI Slot? Thanks

**waverider** · 03-02-2004

Originally Posted by Asterixx

I have a laptop and Ci slot.........how do you upload codes using the CI Slot? Thanks

If you are a member of toes heres the link...then you will see a zip file that gives you the instructions.... http://64.235.50.126/~takula/forum/a...&postid=287878

**waverider** · 03-02-2004

For those of you that still have some question's, why not try brousing the MR site : http://www.matrixcam.com/index.htm

Pandora · 04-02-2004

Originally Posted by waverider

For those of you that still have some question's, why not try brousing the MR site : http://www.matrixcam.com/index.htm

Been looking at lot there, but i just cannot seem to find anything about the use of the MR, updating codes etc.

Where on the site should one be looking ?

**waverider** · 04-02-2004

Originally Posted by Pandora

Been looking at lot there, but i just cannot seem to find anything about the use of the MR, updating codes etc.

Where on the site should one be looking ?

Ok now that you have browsed the MR site and hopefully gathered info on this cam, if you look in the top section of the forum you will see 'Nobbly's Links'. There you will find the links for updated files for the MR m8

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
matrix reloaded cam	martyn	Matrix Reloaded, Revolutions and CAS interface	20	28-08-2006 01:37 AM
Matrix Reloaded Cam - How to update	user909090	Matrix Reloaded, Revolutions and CAS interface	54	22-08-2006 08:29 AM
How to add a new ID in Matrix Reloaded Cam	farrukh	Matrix Reloaded, Revolutions and CAS interface	7	24-10-2005 08:07 AM
Matrix Reloaded CAM & The Fun Card	user909090	Matrix Reloaded, Revolutions and CAS interface	2	01-07-2005 02:51 PM
Matrix Reloaded CAM & No ZAP Channel	user909090	Matrix Reloaded, Revolutions and CAS interface	2	06-01-2004 02:50 PM

Matrix Reloaded CAM All information about the Matrix Reloaded and Revolutions CAMs, plus the CAS interface for programming MMs, MRs and UCAS embedded modules.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)