4 way splitter not working for stb`s ???

alfa155btcc

Hi Guys,

I have a TM 1500 Ci Super and Kaon Stb`s, working off of a Triax 95cm dish with Darkman Motor.

I want to add a Freesat that my friend has lent me for a little while so i need to connect 3 stb from my one satelite motorised dish.

Before when i just had the 2 stbs i used a 2 way splitter one cable in 2 out works fine so i though i would go to my local diy store and try and get a 3 way splitter . I could not find one so i bought what i found which was a 4 way splitter. i wired it all up with lead from dish going to IN and then the other 3 stbs on 3 of the 4 outs, to my dismay found that only my tm1500 ci super worked not Kaon and no Freesat. so i had a little tinker with cables and found that if i changed wires round it was only 1 of the outs that worked and that was the bottom left one.

Can anyone help me out with some sort of solution please ????

Cheers
alfa155btcc

Tivù

Replace the LNB with a Quad Output device.

Allocate one of your Receivers as the Dish Positioner.

Splitters are not the answer as they cause LNB switching conflicts between Receivers.

alfa155btcc

I have used splitter before with 2 boxes and it worked fine, i have just fitted a new single o.1 lnb surely thereis another way ???

alfa155btcc

here is item i am using

Attached Thumbnails

 

Analoguesat

Throw it in the bin.

If you want it to work properly all the time then you need to wire it all up correctly with a quad lnb - splitters do not work correctly as you have found out.

Analoguesat's message to the world Analogue forever!

alfa155btcc

is`nt there a easier way dont really want to run 3 lengths of 35 foot just to get freesat box to work ?????

Analoguesat

You have had our advice. Its up to you if you want to follow it or not.

Analoguesat's message to the world Analogue forever!

Topper

As already mentioned there is a right way and a wrong way. Each stb sends varying voltages to the lnb depending on the polarity of the selected channel. Either do it right or frustrate yourself trying to change the law of physics

War does not determine who is right, it determines who is left!

Formerly toppervte33h
whose six pack has turned into a keg

Help support this web site by making a donation
Or use other options to help support Sats UK
Show Your Support
by clicking the button

Thank you.
Freddie Flintoff is back

alfa155btcc

I have had a reply from another site and they said it could be that splitter may only have 1 leg what does this mean ????

Topper

It cannot be done the way you propose splitters cannot be used end of, each stb wants to control it own lnb hence you need a quad output lnb nothing else to discuss, too many cable muppets giving advice on satellite matters these days

War does not determine who is right, it determines who is left!

Formerly toppervte33h
whose six pack has turned into a keg

Help support this web site by making a donation
Or use other options to help support Sats UK
Show Your Support
by clicking the button

Thank you.
Freddie Flintoff is back

Channel Hopper

Seeing you have posted the picture of your four way splitter that confirms it is an 'all ports powered' type, you should immediately reply to the poster on the other site and advise them to go to spec-savers.

There is a very fine line between "hobby" and "mental illness"

alfa155btcc

so is there any other way of doing this without having wire up a quad lnb as mentioned above ?????????

nanochickin

No there isn't. Nuff Said.

I'm closing this thread as its going nowhere

You have had the advice needed, its upto you what you do with it



Nano