From jonsa to Fibo !!!

pipino

hi,
finaly i got a Brand new FIBO MF90 ,just removed the old Jonsa 90cm and installed the new super dish..the most striking thing was the performance ..i cant beleive in my area i can get transponder 12.402(ITV region) and 12.480(channel4 irland) with a 90CM dish ,its clear that this dish perform´s better then its sisters with the same diametre.i tryed many LNBs and Invacom Quad was the winner performance and fitting wise ...here is some fresh pictures

Attached Thumbnails

         

   

pedro2000uk

Got to say another great post .. thanks Pipino!

CROSSBONES

Thats what you call a dish!

Looking good mate, nice install

Robbo

Yep, very nice dish pipino.

The dish certainly does pull above its size, it beats both another 90cm and a 1m dish that I have. I'm going to try the quad Invacom on mine later too, to see if there's any difference betwen it and the Inverto.

wod

nice what are your other dishes for and where is your gibby 1.5 is that not installed on the roof ?

pipino

yes , in total i have 3 dishes in the same roof ,you see here in the pictures my new MF90 on the right hand side an old prototype from Raven (about 10years old i toke down from the UK) i use it for Astra 19º for testing with DVBcards like TT3200 or Skystar ,then Gibby higher up on the other side of the same roof top witch i use for pure C/KU band DXing,i´m thinking now may be to add a channel master 1.80 with a custom polar mount ,but the big problem i have is the neibours ,in the country house i have about 5 more dishes parked, 2brand new boxed Andrew´s 1.20 (on stand by)and a famaval 180(i already posted some pictures) the rest bits and bobs old polarotors,OMTs ,feedhorns....1.3 Lnb...etc...etc ,but my master plan is one day to put a fully equiped monster dish (between 3.70m to 6.00m)using egis motor with its positioner..of course all depens of the economy..

here is just a tiny bit of my control centre...best regards

Attached Thumbnails

   

wod

whats the powervu box for ?

i see you have a vantage too, good receivers them

pipino

hi,
the powervu box is on stand by for any future possibilities ,still i need to test it soon on all power vu transmissions to see if i can open any without the need of the authorization key,what you see here is just a tiny bit ,i have more then 15decoders of all kinds

tatila

Hi, i have a fibo modified with diseqc motor. Now i have a c120 inavacom, but i don't know how to fit it to the original feedhorn. Have you some detailed picture or the place where to buy a convertitor?
Thanks from Italy.
Bye Luigi

Huevos

The MF90 comes with a C120 flange feed horn. The LNB screws straight on.

tatila

Hi, sorry i didn't understand what you say. When i remove my old lnb from fibo 90 feedhorn I have no way to attach the invacom lnb to the feedhorn. There is a patch?
Thanks

NunoV

Something like in the picture.

Attached Thumbnails

 

tatila

I can buy it somewhere? Or if i made it myself i have to take in consideration some distance factor between feedhorn and lnb?
Thanks
Luigi