Warning!!! Coship 2300 patch

**jzurd0** · 04-09-2004

Hello Poilus, that firm is the more stable i know;one has been released for the Tboston ,for seka2, but it´s VERY buggy, in the Axil you have to switch off the receiver a lot of times as it freezes and each time you switch off you lost ALL data (keys,channels...).

That firmware is the best ,srt3680_dsr5002_5003,until now,better than factory one!.

If we could find anyone with an Tboston 4500 jtagged i could make something with that seka2 firm to be more stable in the Axil...

Cheers.

Note: The Seka2 firm is ONLY for seka2,not for any other system.

poilus · 05-09-2004

ok, thank you for your information.
I waits like everyone for the continuation of the évenements.

after a flash of a boston (B21) & an B38 axil, with their respective firm's : it's the same result on screen,...strong technologies at boot, same test menu...
do you think that it's only the boot part which change, do you have information on the structure of the file.
so i think that with an hex editor as Winhex, it could be possible to adaptate his own firm.
what do you tkink about that?

cheers

error404 · 05-09-2004

Originally Posted by dohc

@error404: Thank you for the file and the instructions, but it doesn't work, ORF also have drop outs all few minutes. Another idea?

Thanks,

bye
Jo

I have download into the receiver the software (bin-file) and TP-list from your new "ORF-file" at dvb-upload.

Hi dohc,
If you don't have in the satelite list TP at Astra1 and you have chosen ASTRA2, there can be problems because ASTRA2 has a weak TP.
I've seen that some MB in PSR5002 show, that write to STB TPliste
is "Good" but this won't be changed.
I've written with hexeditor the new TPlist in emusoft.

Load it and check it out!

http://upload.e-tv.pl/upload.php?file_id=7871

Best regards

**dohc** · 05-09-2004

Hi error 404,

i have download your new file at "dvb-upload.com", beause at "upload.e-tv.pl" i can't open the zip.-file.

It doesn't work again but a little bit better than before with the last file.
Take yourself a look for 10 minutes at ORF 1 or ORF 2, than you can see the problem.

I hope that you can help me again! It would be enough when only "ORF" 100% works.
Or can you do something with the EMU-file "Morocco-Earth.bin"?
http://dvb-upload.com/index.php?acti...load&pid=14513
This file have the same problems with "ORF".

Thank you very much!!!

Greets

Jo

What i have done:
Download the bin-file "without header" with uptool.exe
Keys download with upgrade3.2.exe
6969, 6969 entered
Start search on ASTRA 1
If i make "factory default" now i have a HOTBIRD TP-list in the receiver with 780 programs.
With the last file there was ASTRA1 with all programs load.

hapen · 06-09-2004

Has anybody some exp. with the DSR 5003 FTA ? to upgrade/patch the firmware ?

error404 · 06-09-2004

Originally Posted by dohc

Hi error 404,

i have download your new file at "dvb-upload.com", beause at "upload.e-tv.pl" i can't open the zip.-file.

It doesn't work again but a little bit better than before with the last file.
Take yourself a look for 10 minutes at ORF 1 or ORF 2, than you can see the problem.

I hope that you can help me again! It would be enough when only "ORF" 100% works.
Or can you do something with the EMU-file "Morocco-Earth.bin"?
http://dvb-upload.com/index.php?acti...load&pid=14513
This file have the same problems with "ORF".

Thank you very much!!!

Greets

Jo

What i have done:
Download the bin-file "without header" with uptool.exe
Keys download with upgrade3.2.exe
6969, 6969 entered
Start search on ASTRA 1
If i make "factory default" now i have a HOTBIRD TP-list in the receiver with 780 programs.
With the last file there was ASTRA1 with all programs load.

Hi dohc,
I've tested ORF the whole sunday, and it works on my receiver. Where are you from? It easier for me to write in german or polish. Write me to not.found@gmx.net. I'll test the Morocco emu.

Regards

**jzurd0** · 08-09-2004

Seka 1/2, Nagra, Irdeto, Conax...

http://www.filescenter.com/descargas...00_b34_1.6.zip

Change * to "e"

**legrandchauve** · 08-09-2004

Nobody for the DSR5003

pawelkos · 10-09-2004

For DSR5003 there is a patch from Strong SRT3680.

You can programm it via RS232 using :
1.DSR5002-uptoolB34-fix.zip - up tool file working with DSR5003 also.
2.COSHIP_DSR5002_B29_NagraAU.zip - use only S02B-2.98R-B39.01_21.08.04.bin
Tested 100%
After programming press 6969 x2 to activate Emu, press 8282 for edit keys.

**jzurd0** · 12-09-2004

New Seka2 firmware,not tested.

In sergiosat forum and:

http://www.satupload.org/upload/inde...TR3680_331.zip

poilus · 12-09-2004

hi jzurd0,
i've try use the 331 firm you say, but not good for my axil AD-600, i've a B38 boot
it will be perhaps for the next firm... :-)

cheers.

wwwvex · 12-09-2004

patch for str 3680 sec*2?
Thanks

wwwvex · 12-09-2004

I have put the sw of strong 3680 in the coship 5300 a.It is ok!Is there file-emu sec 2? Thank you.

**oxoid** · 12-09-2004

can someone tell me if i can found a seca2 firmware for the coship 2300A BOOTLOADER 21 because the filecenter 1.6 doesn't work

it begins to upload but stop at bloc 97 on 515

does someone know if it's possible to upgrade bootloader 21 to ..34..39...

thanks for your help

**jzurd0** · 12-09-2004

I need SOMEONE WITH A TBOSTON 4500 with a WORKING JTAG.

Please let emails,or message me.

It´s VERY important for the AXIL users,(Seka2 related).

P.D: It´s near, Poilus...

kpakistan · 13-09-2004

this file name srt3680-331 look like jtag file bcz it have 2048 bytes while those file which r upload through loader have 2049 bytes. so i hope it works with my coship 2300b when i flash with jtag program
any sucess i hope share here .

**dohc** · 16-09-2004

Originally Posted by error404

Hi dohc,
I've tested ORF the whole sunday, and it works on my receiver. Where are you from? It easier for me to write in german or polish. Write me to not.found@gmx.net. I'll test the Morocco emu.

Regards

Hi error404,

do you received my e-mails?

Greets
Jo

poilus · 17-09-2004

. .

fegro · 21-09-2004

Hello, Im new in this forum.
Today I got a new digital fta receiver called dsr5300.
It looks like the 2300. Is it possible to patch this receiver?
mfg fegro

fegro · 21-09-2004

Hello,
im searching for a patch coship_DSR5002_B29_NagraAU.zip
S02B-2.98R-B39.01_21.08.04.bin.
Thanks for reply
fegro

r0mek · 23-09-2004

Hello,

Nagra AU doesn't work since today.

I'm looking for new firmware.

Best regards

r0mek

wanders · 24-09-2004

Hello masters.

Has bought new Coship and at once a problem. I can insert software fon Pack Boston-Coship. My receiver
S02A-2.99R-B39.01
STS-MB.02A-SZLo.
Loading passes normally, but after start only the white screen and no channels and I can not cause the menu.

With Marocco patch I have gut screen, but sound is only noise.

Have you idee? Can be eat updated version Morocco-Earth software?

freshpike · 24-09-2004

I have the same problem with a S02A-2.98R-B39.02

**legrandchauve** · 24-09-2004

For DSR5003

"ancien et nouveau coship plus stable que moroco.zip"
http://groups.yahoo.com/group/Nondidju/

peles · 24-09-2004

legrandchauve vbmenu_register("postmenu_142207", true); hello
how can i have software :-) for dsr5003
please help me

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
coship 2300 : new patch seca2 fixed	59krimo	Receiver software, international Section	6	21-04-2008 12:09 AM
ne patch	megabit800	Receiver software, international Section	2	13-12-2006 08:54 PM
where can i find sofftwere edit for Coship 2300	ufo77	Receiver software, international Section	1	06-09-2005 08:27 PM
Coship 5300 patch ???	Nagraeblanco	Receiver software, international Section	10	30-12-2004 08:53 PM
WARNING!!! Novarg is spreading fast	net1	Computer Discussion	8	30-01-2004 07:04 PM

Warning!!! Coship 2300 patch Information exchange on receiver software, including updates, problems and fine tuning.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)