Truman tm150 firmware... need ur help badly! :(

thesame2

I have a truman tm150 receiver,
i have the cable, i downloaded the new firmware..
but all i need is the exact steps to upgrade the device..
need to know when to plug the power into the receiver, when to
unplug, what to upload first, how to save the channel list....
i searched alot in this forum and others, but found no instructions
for my model, seems it's not well known
if anyone can help , please go on

blackhawk

You might wanna take a look at the RS-232 wiring too, due to some reasons the manufacturer has re-wired the port.

I came across this when I was trying to do the same with my Truman 7000, I will check and let you know how the wiring was done, but, cannot guarantee that the wiring will be the same.

Cheers!

TITMF

Hi,

I've made an upgrade on my TM150 ultra without any problem with the steps here below:

1 Open the loader and the last version software
2 Switch the receiver off
3 Launch the download with the loader
4 Switch on the receiver (normally the process will start)

Regards,

thesame2

thank you blackhawk for advice,
many thanks titmf, it worked as you said

i have only one problem,
when i tried to take an image of my current channels using
the channel editor program - i downloaded my software from www.tmsatsw.com - it failed
and i had to research for the channels and arrange them again

after update i tried to take an image of the new channel list
it worked , but when i open the file with the channel editor, it
displays strange characters, and the channels aren't shown

does anyone have any idea about that??

thanks;

TITMF

Hi,

To be honnest, I've no idea for your Image problem. Maybe someone else. The image is maybe not compatible between 2 different software version ?

Regards,