SS2 card Jumper setting ?

bobit

Hi All..

I'm just wondering what the 2 pin jumper is for on my card?. The manaul does not mention it at all, i did a search on some forums but it never seems to have been mentioned.

Strange really the only software i can get to work properly is MyTheatre but it seems good so far. Progdvb says card not started even though i have the correct skynet.sys. DVBViewer has the dreaded #90010115 error !. Can't get DiSeQc to work.., SS2 Init error. Anyway i should not complain if it's working...hi

thanks

Rob

rolfw

Just had a look at my card bobit, couldn't see a jumper, is yours the latest revision?

Rolf If you enjoy our site, you can help support it by wearing our unique branded merchandise, you can do this by clicking on my baseball cap, making a direct donation with Paypal by clicking on the Donation button below, or using our site supporting advertisers, to do this, click on the central image below. Follow us on Twitter, click on the twitter image.

bobit

@rolfw

Yes this is a fairly new revision i think, it says 2.68 on the card.
The jumper is to the bottom right of the tuner next to the main B2C2 IC.
I have tried changing the jumper over but it does not seem to make any difference. i thought it could be hardware irq setting or something, but it is a plug n play card... who knows what it's for!


Rob

rolfw

That would explain it then, could be worth going onto the www.technisat.de site and using the contact button to ask them.

Rolf If you enjoy our site, you can help support it by wearing our unique branded merchandise, you can do this by clicking on my baseball cap, making a direct donation with Paypal by clicking on the Donation button below, or using our site supporting advertisers, to do this, click on the central image below. Follow us on Twitter, click on the twitter image.

Maurice1

Hi Bobit,
It is mentioned in the pdf files on the CD that if you install the card and if in "Device Manager" the card shows up with a yellow ! mark you change the jumper to shorting the 2 pins. But I have no idea what it does
Maurice

nacturnal

hello,
The rev of the skystar2 card with jumper is called as 2.6B not 2.68.The jumper is used if BIOS is not identified the card.The jumper is used only for older non PCI complaint motherboards.