Introduction to Asia Broadcast Satellite (ABS-1 75.0 East)

pkgaran · 19-01-2008

Hi David,

you can do yourself to do the settings, check the antenna direction ***.dishpointer.com

I am receiving the channels from my 60cm dish in pondicherry.
- admin
if you have any questions call me at phone number removed

best of luck

karunagaran p

**Analoguesat** · 19-01-2008

Personal details such as phone numbers should not be posted on the forum. Only swap them by email or pm.

lnb15k · 21-01-2008

Originally Posted by Davsat

Hello Senior Menbers

Do you know any dish antenna technicians in Chennai who can setup my 90 cm ku band antenna to receive ABS1 south beam. I have TVS electronics Setop box. Also I have Zenega receiver and 60 cm antenna from DishTv Network.

Thanks
David

I am also from Chennai but PM is not allowed for new members

See my profile and if you want you can contact me there

With your above equipements you can receive that satellite very easily.

Davsat · 25-01-2008

Hi pkagaran
Thanks for the reply, I have visited ***.dishpointer.com which was very usefull. I will try to do allignment myself, Hope it will work for me.
David

Davsat · 25-01-2008

Hi lnb15k
Thanks alot for the reply. I was desperate in searching someone who can help me in alligning antenna with abs1, Thanks God you guys are really responsive and helpful. I will try to allign myself, Lets see whats happen....

Thanks
David

Davsat · 30-01-2008

Originally Posted by lnb15k

I am also from Chennai but PM is not allowed for new members See my profile and if you want you can contact me there With your above equipements you can receive that satellite very easily.

Hi lnb15k

I tried to allign but I was only able to get 50% signal but when I tried to retune it I lost that bird. Later I tried for hours but in vein. Totally hopeless

David

Jigten · 01-06-2008

Dear sir,

please broadcast the VOA and RFA radio again on your satellite...

jigten

Originally Posted by seanlangston

Dear Forum Members,

I would like to introduce myself. I am the Senior Director of Broadcast Services at Asia Broadcast Satellite, the owner and operator of the ABS-1 satellite at 75.0 East. I have been following some of the message threads about ABS-1 (ex LMI-1) in this forum and would like to open a channel for communications with our company here.

If you have any questions about ABS-1, our services, coverage, power, or channels currently broadcast by our satellite, I will do my best to answer them.

ABS will be exhibiting at the upcoming CommunicAsia 2007 expo in Singapore from June 19 to 22, and at the planned EMEC 2007 in Karachi from July 16 to 17. If you would like to learn more about our company, please drop by and say hello.

Regards,

Sean Langston

vipinsatyawali · 01-06-2008

Hi

I am in India DElhi 28.5latitude 77.7 longitude.What size of dish is required and which channels can be viewed on ABS
Regards
Vipin

**Moradabad** · 01-06-2008

for Delhi Abs KU u need 120 CM what types of fiber glass dishes u sell

ajayvats · 28-08-2008

Originally Posted by Moradabad

for Delhi Abs KU u need 120 CM what types of fiber glass dishes u sell

i am in delhi. tried recieveing abs1 on my dish tv dish but was getting edusat @74 E with signal quality @ 92-93% after rotating the lnb.

But still not recieving ABS1. what do i do ?

someone pls. help...

ramakrishnan · 31-08-2008

sir,
how can i receive abs satellite on my 60 cm ku band dish antenna.i am currently staying in delhi
plz help

**Analoguesat** · 31-08-2008

Originally Posted by ramakrishnan

sir,
how can i receive abs satellite on my 60 cm ku band dish antenna.i am currently staying in delhi
plz help

Read post 59. You need a 120cm dish.

ajayvats · 06-09-2008

Originally Posted by Moradabad

for Delhi Abs KU u need 120 CM what types of fiber glass dishes u sell

Originally Posted by Moradabad

Sir KU CLAMPS are special clamps with 1 Big ROD & A CLAMP to Hold multiple LNBS on same dish.

I receicve ABS1,ST1,TATA, DISHTV, 91.5 on same 60 CM dish

hi moradabad,

Now i am able to recv abs1 with 60cm dish tv dish. But 1-2 tp's only, rest have very low signal around 10-20 percent due to which the reciever is unable to find any channels..

what do i do ? pls guide..

ajayvats · 10-09-2008

Originally Posted by Moradabad

for Delhi Abs KU u need 120 CM what types of fiber glass dishes u sell

hello

now i am able to recieve abs1 all tp's

but want to ask one thing

is anyone observing sun outage around 10 am to 1130 am in delhi ?

my signal is dropping around these time to less than 20%

if not sunoutage, what else could be the problem ?

ajayvats · 17-09-2008

anyone else getting abs1 all tp's / FTA channels on 60 cms dish in delhi ?

i am getting tp 12549 v 22000 with very low signal/disrupt viewing/ square box -pixeling.

all other tp's i am recieving with ok signal and viewing quality.

any specific lnb will do it better ? pls suggest

**Moradabad** · 18-09-2008

Please mention the signal of All the tps & better take a Original receiver as in local chinese receivers Tuner is not good.

Try to load FTA sw in Zenega that is good receiver

ajayvats · 18-09-2008

Originally Posted by Moradabad

Please mention the signal of All the tps & better take a Original receiver as in local chinese receivers Tuner is not good.

Try to load FTA sw in Zenega that is good receiver

but where can i get fta s/w for zenega ??

**immi22_80** · 19-09-2008

Hi
U need to degrade ur receiver.....
Thanks

ajayvats · 19-09-2008

Originally Posted by immi22_80

Hi
U need to degrade ur receiver.....
Thanks

thanks

from where ? do u have any contact no / place information ?

i need to get my 2 zenega cd1004is stb's FTA

pls see my profile for email / pm.

rvinmurthy · 03-11-2008

Hi All.,
ABS-1 Channels of South Beam, previously i was used to Get FTV and some other fashion and lifestyle channels in that direction long back, but now those channels are not available, is there any chance of getting back those channels in ABS 1 of South Beam... any new channels in that direction in the near future.. if any body have the news plz post that.....

Thanks..

baballe · 02-12-2008

Hi, we are tring to get ABS1 75E beam 6A from nigeria can you pls help me with freqency and symbol rate to get signal on beam A.

Ahmad

Originally Posted by seanlangston

Dear Forum Members,

I would like to introduce myself. I am the Senior Director of Broadcast Services at Asia Broadcast Satellite, the owner and operator of the ABS-1 satellite at 75.0 East. I have been following some of the message threads about ABS-1 (ex LMI-1) in this forum and would like to open a channel for communications with our company here.

If you have any questions about ABS-1, our services, coverage, power, or channels currently broadcast by our satellite, I will do my best to answer them.

ABS will be exhibiting at the upcoming CommunicAsia 2007 expo in Singapore from June 19 to 22, and at the planned EMEC 2007 in Karachi from July 16 to 17. If you would like to learn more about our company, please drop by and say hello.

Regards,

Sean Langston

baballe · 03-12-2008

Hi, seanlangston

We are tring to get ABS1 75E beam A from nigeria can you pls help me with freqency and symbol rate to get a tv signal on beam A.

Ahmad

vilim · 22-01-2009

Originally Posted by baballe

Hi, seanlangston

We are tring to get ABS1 75E beam A from nigeria can you pls help me with freqency and symbol rate to get a tv signal on beam A.

Ahmad

Hi Ahmad,

If you check on the site: http://www.lyngsat.com/abs1.html
ABS-1 do not have channels on A-Beam.

vilim

pratheepan · 18-02-2009

hi sean,
welcome to this group,well v r always interest in well knowing about abs.

***BombedOne*** · 18-02-2009

But as far as I know, ABS-1 is owned by russian company, GTSS?

"GTSS offers a complex service on delivery of, processing and releasing TV programs, as well as uplink based on GTSS’s own platform on spacecraft LMI-1 (ABS-1) and distribution through Russian and the CIS cable operators networks."

_ttp://www.gtss.ru/Products_and_Services/Broadcasting_services

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)