pioneer ex "ON" digibox

devonbrown

I have just got at a car boot sale a Pioneer 210 ex "ON" digibox. It came without a remote control and I am hoping that a "oneforall" will suffice. Can anyone confirm this. Also, as I have never used "ON", if anyone has a copy of the instructions and could scan them and copy me I would be very grateful.
TIA

rolfw

There really isn't much in the instruction book, any questions you have, just ask.

As for the remote, I'm not sure, but there are a few stores around selling them for a few pounds.

Rolf If you enjoy our site, you can help support it by wearing our unique branded merchandise, you can do this by clicking on my baseball cap, making a direct donation with Paypal by clicking on the Donation button below, or using our site supporting advertisers, to do this, click on the central image below. Follow us on Twitter, click on the twitter image.

devonbrown

Simplest question of all rolf. I plug it in. I switch it on. what do I do next? I keep reading about software updates but I don't know what to do

rolfw

Won't do it now, but I'll plug the box in tomorrow and see what menu commands are available using the front panel, you could try menu button, navigate to starting up and then go to store channels, that should give you something to work with.

Rolf If you enjoy our site, you can help support it by wearing our unique branded merchandise, you can do this by clicking on my baseball cap, making a direct donation with Paypal by clicking on the Donation button below, or using our site supporting advertisers, to do this, click on the central image below. Follow us on Twitter, click on the twitter image.

devonbrown

thanks rolf I'll not be able to try tomorrow as where I am now doesn't support terestial digital

devonbrown

When I switch on and then press select I get P 10 on the box display and BBc 4 on the tv. the box appears to be locked as nothing changes no matter what button I press. If, however, I take the aerial out and then go through the same procedure I get menus for changing channels and if I press menu I get ON digital menus. In No.7 of these I get the possibility of an update.If I take this and replug my aerial, on the display I get 'auto update' for a while then I get 'update error' showing. With the aerial out I can set it on any channel I wish and the when i replug my aerial I get that channel but I am locked into it and cannot get any response from any button.

bigrandydavid

in the menu you need option 5 (?) getting started then `add channels` but obviously if you do this with the ariel out you won`t find many channels.
there are ways to do factory resets on your box. i can find the info if you need (bit rusty with all that since the demise of itv digi)

presumably you`ve turned off the power at the plug for about 20 seconds as this will usually sort out the problem you describe.

a turd cannot be polished our Ashley, I SAY YOU CAN`T POLISH A TURD

devonbrown

Thanks dave, I have done what you suggested and I now get a list of all progs available. If I choose any BBC prog I get locked in it, but, if I choose ITV2 or QXL I can get up the menu to change channels and go wherever I want, until I go to a BBC prog.or any of the basic 5, and then the only way out is to power off. I would be interested in a 'factory reset' if it doesn't put you to too much trouble. TIA

devonbrown

re the remote. will any ON remote operadt this box as per sky remotes

rolfw

I believe so, but not 100% sure.

Rolf If you enjoy our site, you can help support it by wearing our unique branded merchandise, you can do this by clicking on my baseball cap, making a direct donation with Paypal by clicking on the Donation button below, or using our site supporting advertisers, to do this, click on the central image below. Follow us on Twitter, click on the twitter image.

Channel Hopper

Unfortunately its a case of manufacturer specific

All remotes are different as there has nexer been a central policy for DTT, unlike Sky where all the main features were decided in the initial rollout, one reason why Sony has suffered so much wrt the digial audio out

There is a very fine line between "hobby" and "mental illness"

devonbrown

Thanks to everyone for their help. Sorry for taking so long in coming back but illness prevented. I now have a remote and everything works perfectly. But there is a little anomoly that the group may find interesting. I have found this on 2 different pioneer boxes. As I previosly stated on any BBC channel pressing select on the box had no effect. But pressing select on the remote causes the channel list and change menu to come up. I have no idea why.

ProDave

I believe there's a bug in the set top box software. If a channel has a MHEG application (which means text or interactive content) then some or all of the front panel buttons are disabled on some boxes)

All the BBC channels use MHEG but currently ITV does not.

There's probably nothing you can do about it, just put up with it as it's unlikely they will ever now update the software in your box.

http://www.highlandservices.info for B&B. Hill Walking etc in the Highlands of Scotland