2M dish in Italy for sale

Messages
8
Likes
0
My Location
Midway between Florence and Bologna, Italy
#1
In advance of our move from Italy to Germany in the next few weeks, I need to sell our faithful 2 metre prime focus dish, quad output Invacom LNB and associated kit, which has served us well for 2D.
Anyone interested, please take a look at:
http://www.barkydog.co.uk/dishforsale
thanks
Mike
 

dave branson

Regular Member
Messages
316
Likes
0
My Location
Florence Italy
#2
mikethebike said:
In advance of our move from Italy to Germany in the next few weeks, I need to sell our faithful 2 metre prime focus dish, quad output Invacom LNB and associated kit, which has served us well for 2D.
Anyone interested, please take a look at:
http://www.barkydog.co.uk/dishforsale
thanks
Mike
Same type of rig i have,its a bargain for someone at 350 euro.
 

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,671
Likes
1,279
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
#3
Wouldn't normally allow items for sale on here Mike, but as many people seem to find it either difficult, or prohibitively expensive to buy these sized dishes, I will be OK with it. :)
 

dave branson

Regular Member
Messages
316
Likes
0
My Location
Florence Italy
#4
rolfw said:
Wouldn't normally allow items for sale on here Mike, but as many people seem to find it either difficult, or prohibitively expensive to buy these sized dishes, I will be OK with it. :)
This is why i like this site,good on ye rolfw.
 

closetosoton

More dishes than Sense.
Messages
502
Likes
0
My Satellite Setup
Wavefield T55, 20 LNB's and a whole load of analogue boxes!
My Location
Close to Southampton
#5
rolfw said:
Wouldn't normally allow items for sale on here Mike
Can't we have a "for sale" section on the forums? I guess there's many reasons not to, which don't come to my mind since I'm new here (probably along the lines of people selling dogey kit/cards/CAMS, shops pushing their stuff in forum,,,, erm... probably loads more..)

CTS
 

dave branson

Regular Member
Messages
316
Likes
0
My Location
Florence Italy
#6
closetosoton said:
Can't we have a "for sale" section on the forums? I guess there's many reasons not to, which don't come to my mind since I'm new here (probably along the lines of people selling dogey kit/cards/CAMS, shops pushing their stuff in forum,,,, erm... probably loads more..)

CTS
In terms of the likes of this dish,which is a bit of a specialist type of equipment,and a bargain for someone living in a fringe area,it may be ok.
For the rest,i would not like to see it,as this site is a bit special,best to keep it that way.
 

BGonaSTICK

Retired Moderator
Messages
5,145
Likes
0
My Satellite Setup
Dreambox 7000, Skystar2
My Location
Brighton
#7
Ahhh, I was chatting to Rolf about this last week.

I think it's a bit 50/50, and I think it would probably cause us poor hard-done-by mods a lot more work, although it would be great in a perfect world.

Unfortunately, the world ain't like that... :(

Anyone wanna buy a second-hand washing machine?

My wife's on the blink, and I'm looking for a new one...
 
Messages
8
Likes
0
My Location
Midway between Florence and Bologna, Italy
#8
Thanks to rolfw (you actually helped me set the thing up a while back) and Dave Branson, it's clear you guys know the problems with getting hold of these dishes. I wouldn't have posted if there were reasonable alternatives, and the same posting has already been wiped off another similar, but clearly less flexible site.
Sadly, only response so far has been from Sweden (I couldn't get the dish into an envelope, I tried!), but fingers crossed something will turn up. I'll try Ebay if I don't find a buyer by next week.
Thanks again for your understanding!

And BG, I can only guess your other half doesn't read these postings, else you'd be toast by now - I know I would!
 

Likvid

ASBO Club Member - Persona non grata
Messages
1,752
Likes
5
My Location
Stockholm, Sweden
#9
mikethebike said:
it's clear you guys know the problems with getting hold of these dishes.
There is no problem getting big dishes 1.8m and up, if you turn to your local shop i understand it is a problem as they don't sell commercial dishes.

For an example....

€383 ex shipping +VAT for a Andrew 1,8m(Channel Master) Offset dish with feed and AZ/EL included.

€1740 ex shipping + VAT for Andrew 2,4m(Channel Master) Offest dish with feed and AZ/EL.

€382 ex shipping + VAT for Prodelin 1,8m Offset dish with feed and AZ/EL.

I don't sell these directly so don't PM me about it please, it's my dealer i buy from who i got these prices from.
 
Messages
13
Likes
0
#10
I live near Perugia, Umbria and I would like to buy a big dish. I was thinking about a 2.4 or 3m dish.
Is there anyone who could suggest a retailer or site where to inquire?
I know that shipping charges for big dishes are quite high so I'm looking for something reasonable. Please, can you hel me?
 

dave branson

Regular Member
Messages
316
Likes
0
My Location
Florence Italy
#11
gio2010 said:
I live near Perugia, Umbria and I would like to buy a big dish. I was thinking about a 2.4 or 3m dish.
Is there anyone who could suggest a retailer or site where to inquire?
I know that shipping charges for big dishes are quite high so I'm looking for something reasonable. Please, can you hel me?
If you are looking to receive the Astra 2D channels,ie BBC,you may have problems with even a 2.4/3.0 meter dish in the Perugia area.
 

lummer

Regular Member
Messages
13
Likes
0
My Location
Castelli Romani, Rome
#12
I'd buy your dish no problem in a second to help me get Astra 2D, if it wasn't for the fact I live in Rome and from what I have read even a 2m dish is too small for me.
)(-red
 

Likvid

ASBO Club Member - Persona non grata
Messages
1,752
Likes
5
My Location
Stockholm, Sweden
#13
gio2010 said:
I live near Perugia, Umbria and I would like to buy a big dish. I was thinking about a 2.4 or 3m dish.
Is there anyone who could suggest a retailer or site where to inquire?
I know that shipping charges for big dishes are quite high so I'm looking for something reasonable. Please, can you hel me?
A Prodelin 3.7m dish with AZ/EL mount and feed cost around $1,700

The same as above but 3.0m dish cost around $1,280

All prices are excluding VAT and shipping costs.....
 

barney

Regular Member
Messages
115
Likes
0
#14
gio2010 said:
I live near Perugia, Umbria and I would like to buy a big dish. I was thinking about a 2.4 or 3m dish.
Is there anyone who could suggest a retailer or site where to inquire?
I know that shipping charges for big dishes are quite high so I'm looking for something reasonable. Please, can you hel me?
I live in abruzzo, and i have a 3 mt dish prime focus with motor.
I cant get astra 2d.
it is two year old, if you are interessed send me a e-mail.
barney
 
Messages
13
Likes
0
#15
Likvid said:
A Prodelin 3.7m dish with AZ/EL mount and feed cost around $1,700

The same as above but 3.0m dish cost around $1,280

All prices are excluding VAT and shipping costs.....
And do they sell Prodelin dishes in Italy? If not, where would it be easier to get one? Thanks
 

dbolton

Regular Member
Messages
73
Likes
1
My Location
UK Essex (upminster)
#17
barney said:
I live in abruzzo, and i have a 3 mt dish prime focus with motor.
I cant get astra 2d.
it is two year old, if you are interessed send me a e-mail.
barney
Hi Barney

i tried to email you but your profile wont accept emails,can you email with a proice for the 3m dish.

Thanks
 
Top