7000 and 7020 together

fantom007gr

Member
Joined
Jun 19, 2005
Messages
20
Reaction score
0
Points
0
My Satellite Setup
DREAMBOX 7000
My Location
GREECE
i try to cnnect one 7000 with 7020 both hydra software
the 7000 has the irdeto module and an irdeto card of freex tv and radecast v3.0 final and ip 192.168.0.10 in the communication set up

the 7020 has radecast v3.0 beta 14 and in radecast server settings the ip
192.168.0.10
i have tried connections between the two boxes with lan cable patch cat5 cable
and hub in between but no picture in the other box
the 7020 when i connect to the wireless it works with the some settings
any saggestions please?
 

Butterbox

Regular Member
Joined
Feb 5, 2004
Messages
108
Reaction score
0
Points
0
Age
53
My Satellite Setup
Dreambox 7000s serving 4 500s. 2 fixed dishes + 1 motor.
Dragon 4.1
My Location
Mayo, Ireland
The two boxes need different IP addresses.
Google "How To by Klona" for info setting up card sharing
 

fantom007gr

Member
Joined
Jun 19, 2005
Messages
20
Reaction score
0
Points
0
My Satellite Setup
DREAMBOX 7000
My Location
GREECE
they have different ip addresses
in communication setup
the 7000 have 192.168.0.10
the 7020 have 192.168.0.27
 

sputnick

Regular Member
Joined
Jul 13, 2004
Messages
160
Reaction score
1
Points
0
Age
49
My Satellite Setup
DM7000S, movable dish 1m pointing at 13E, 5E and 4W. The Gemini Project 2.90 Image in Flash. No multi-boot.
My Location
Belgium - Brussels
Why dont you connect them via a router ? Or it should be connected directly ? And correct me if i'm wrong, but when connecting two boxes, isn't it like connecting two pc's ? You need the cross over cable... Even if you use hub, it's just for signal ....
 

BGonaSTICK

Retired Moderator
Joined
Dec 22, 2003
Messages
5,145
Reaction score
0
Points
36
Age
50
My Satellite Setup
Dreambox 7000, Skystar2
My Location
Brighton
Yes, direct connection should use crossover cable, or 2 straight patch leads if using a hub/switch (and not using the uplink port, or auto-X-sensing ports).

IP's should be different, but the 'client' should obviously point to the 'server' address as well.

There is some additional config setup to do on the server, and both boxes should idealy be running identical versions.

STICK
 
Top