90% signal quality with no signal!

lesath

Member
Joined
May 27, 2003
Messages
3
Reaction score
0
Points
0
Website
Visit site
My Location
Sandefjord, Norway
Here's a mystery I have just come across regarding my Panasonic DSB 30.

Try this yourself and see what you get!

1. Go to Installer Menu (system setup 0,1)
2. Change default transponder settings to 10773/H 22000 5/6
3. immediately unplug power cord from digibox
4. wait 10 or so secs and plug it back in
5. go to signal strength (item 6 in system setup)

What do you see? Mine shows 60% signal strength and 90% signal quality. The Lock Indicator shows 'locked' and the other two values (network id and transport stream) are 0000.

Now - and get this! - if i unplug the LNB cable from the back of the box, the signal strength drops to zero (naturally!), the Lock Indicator goes to 'unlocked', BUT THE SIGNAL QUALITY REMAINS AT 90%!

Any ideas anyone?

By the way, sorry if this has appeared as half a post already ... i hit the tab and enter key in quick succession by accident and submitted the previous attempt prematurely.

Mike
 

rolfw

Believe it when I see it Admin.
Staff member
Joined
May 1, 1999
Messages
38,292
Reaction score
1,615
Points
113
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
It would appear to be a software glitch Mike, probably nothing more.
 
Top