TimUK
Member
- Joined
- Sep 6, 2009
- Messages
- 5
- Reaction score
- 0
- Points
- 0
- Age
- 56
- My Satellite Setup
- not yet installed
- My Location
- Herts
I hope to set-up my first motorised system shortly and am intending to buy the various bits of kit as I go because if I get the lot I will only try and have everything installed and being watched in half a day leading to a poorish install.
I will be using a dish of no more than 1 metre size with a DiseqC dark or technomate motor. However as I don't yet have the dish or motor I am unsure what size T&K brackets I will require to allow full movement of the dish.
The dish will be going on a south facing wall.
Any advice as to choice of rawl plugs etc for mounting also most welcome and the distance between the T and K bracket. My existing sky dish is about 3 metres above the ground and I am intending to have the new dish in a similar position.
Finally is a 2" diameter pole recommended, only I only have smaller diameter pole here and have seen 2" pole being sold for silly prices - 35 notes for a 2m long pole seems outrageous.
I will be using a dish of no more than 1 metre size with a DiseqC dark or technomate motor. However as I don't yet have the dish or motor I am unsure what size T&K brackets I will require to allow full movement of the dish.
The dish will be going on a south facing wall.
Any advice as to choice of rawl plugs etc for mounting also most welcome and the distance between the T and K bracket. My existing sky dish is about 3 metres above the ground and I am intending to have the new dish in a similar position.
Finally is a 2" diameter pole recommended, only I only have smaller diameter pole here and have seen 2" pole being sold for silly prices - 35 notes for a 2m long pole seems outrageous.