Aluminium Tin foil reflector for Ku band ?

koansrc

Regular Member
Joined
Nov 14, 2006
Messages
315
Reaction score
0
Points
0
Age
60
My Satellite Setup
CM 3.0m @ 28.2 w PACE
My Location
Athens-Greece
Is thin aluminium foil sufficient to reflect KU band signals ? I've seen some home grown dishes made from cardboard and tin foil that claim to receive signals ... ... but is it true ? Can a single layer of aluminum tin foil reflect signals ?
 

PSB

Satellite Head
Joined
Dec 13, 2006
Messages
33
Reaction score
0
Points
0
Age
53
Website
www.psbsatellite.com
My Satellite Setup
Dreambox DM 800HDse

Traxis DBS 6000 HD (Soon)

Matchbox Pro USB receiver

90cm and 1.8m dish

Ku and C-Band
My Location
Minneapolis/St. Paul USA.
Sure can! In fact some dish antenna manufacturers use a plastic dish and paint them with a thin coating of Aluminum metallic paint to reflect the microwave signals into the LNBF!

This dish is made JUST with a thin film of Aluminum..........

index.php


[tube]-Srz4ToqzIY[/tube]
 

Robbo

Retired Mod
Joined
May 17, 2007
Messages
6,424
Reaction score
5
Points
38
Age
57
Website
www.mbcsatellites.co.uk
My Satellite Setup
TM6800HD, TM1000, TM600 Linux,TM2200 motor, Channel Master 1.2m motorised, TD110 dish Meter=Satlook Micro+G2 NIT
My Location
Gravesend,Kent,UK
The most difficult bit would be getting the parabolic shape correct.:)
 

koansrc

Regular Member
Joined
Nov 14, 2006
Messages
315
Reaction score
0
Points
0
Age
60
My Satellite Setup
CM 3.0m @ 28.2 w PACE
My Location
Athens-Greece
Robbo71 said:
The most difficult bit would be getting the parabolic shape correct.:)

It's funny you should say that Robbo71 :) .. .. ..

I migth post some pictures late on .. .. .. when I actually receive .. .. something ;)
 

Robbo

Retired Mod
Joined
May 17, 2007
Messages
6,424
Reaction score
5
Points
38
Age
57
Website
www.mbcsatellites.co.uk
My Satellite Setup
TM6800HD, TM1000, TM600 Linux,TM2200 motor, Channel Master 1.2m motorised, TD110 dish Meter=Satlook Micro+G2 NIT
My Location
Gravesend,Kent,UK
koansrc said:
It's funny you should say that Robbo71 :) .. .. ..

I migth post some pictures late on .. .. .. when I actually receive .. .. something ;)


What is funny is the attempt I made once:-rofl2. I carefully calculated a parabola using Excel, stuck lots of pieces of paper together to get a big printout. Used this as a template to make a frame, then cellotaped some aluminium foil to it. It was rubbish, and picked up nothing.:-rofl2
My construction skills are not up to much though.

I take it that it will be a prime focus?, come on post a picture now:p, it might give me a better idea how to build another one.
 

HB13DISH

Retired Mod
Joined
Aug 13, 2007
Messages
3,764
Reaction score
1
Points
0
Age
78
My Location
Middle East - Israel
Robbo71 said:
What is funny is the attempt I made once:-rofl2. I carefully calculated a parabola using Excel, stuck lots of pieces of paper together to get a big printout. Used this as a template to make a frame, then cellotaped some aluminium foil to it. It was rubbish, and picked up nothing.:-rofl2
My construction skills are not up to much though.

I take it that it will be a prime focus?, come on post a picture now:p, it might give me a better idea how to build another one.

Did you try using a dish to make a template?
It already has the correct shape and all you need to do is make the prototype using a not-so-flexible metal sheet (Aluminum, Gold, Silver, copper).
Haven't tried this myself, as I have ran out of gold sheets. :-rofl2
 

Robbo

Retired Mod
Joined
May 17, 2007
Messages
6,424
Reaction score
5
Points
38
Age
57
Website
www.mbcsatellites.co.uk
My Satellite Setup
TM6800HD, TM1000, TM600 Linux,TM2200 motor, Channel Master 1.2m motorised, TD110 dish Meter=Satlook Micro+G2 NIT
My Location
Gravesend,Kent,UK
At the time I only had the one dish, it was very small, but I needed it up on the wall. Using an existing dish is a good idea though :), but cheating a bit:),
I'll give it a go.:-rofl2.
 

koansrc

Regular Member
Joined
Nov 14, 2006
Messages
315
Reaction score
0
Points
0
Age
60
My Satellite Setup
CM 3.0m @ 28.2 w PACE
My Location
Athens-Greece
ok, here's the attempt ... at creating a subreflector for the 3.0m CM ...

drew the parabola using the string technique, made a mold from a piece of wood, copied the mold to a series of softwood pieces, used cardboard to form the dish petals, covered in silver foil, adjusted lnb to calculated focal point, hooked up to meter and received ... nothing. I was hoping I could blame the thin foil, but I guess not :-rofl2
:-lmao
 

Attachments

  • DSCF1127.JPG
    DSCF1127.JPG
    114 KB · Views: 338
  • DSCF1126.JPG
    DSCF1126.JPG
    109.2 KB · Views: 285
  • IMAGE_142.jpg
    IMAGE_142.jpg
    79.4 KB · Views: 255
  • IMAGE_143.jpg
    IMAGE_143.jpg
    70.2 KB · Views: 250
  • IMAGE_144.jpg
    IMAGE_144.jpg
    72.7 KB · Views: 246
  • IMAGE_149.jpg
    IMAGE_149.jpg
    85.3 KB · Views: 323

Robbo

Retired Mod
Joined
May 17, 2007
Messages
6,424
Reaction score
5
Points
38
Age
57
Website
www.mbcsatellites.co.uk
My Satellite Setup
TM6800HD, TM1000, TM600 Linux,TM2200 motor, Channel Master 1.2m motorised, TD110 dish Meter=Satlook Micro+G2 NIT
My Location
Gravesend,Kent,UK
Excellent job!!

Shame it doesn't work, it deserves to.:)
 

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,533
Reaction score
8,554
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
Ah, you have suggested the 3m CM requires a subreflector, which it doesn't.

Any alteration from the original design would only lose efficiency.
 

johnsattuk

Regular Member
Joined
Sep 4, 2004
Messages
433
Reaction score
2
Points
0
Age
88
My Satellite Setup
Topfield 5800 Echostar3000,DB7000, Relook 400S, Humax HDC2000, 55cm Fibo Gregorian dish with waveguide and Motek 2100 mod, 90cm Fibo Gregorian dish, 120cm Fibo Gregorian dish on a 1224 motor with waveguide
My Location
West Mids, UK
koansrc said:
ok, here's the attempt ... at creating a subreflector for the 3.0m CM ...

drew the parabola using the string technique, made a mold from a piece of wood, copied the mold to a series of softwood pieces, used cardboard to form the dish petals, covered in silver foil, adjusted lnb to calculated focal point, hooked up to meter and received ... nothing. I was hoping I could blame the thin foil, but I guess not :-rofl2

Very ingenious construction :-worship

I think that a slight design flaw may not have helped the performance, sub-reflectors are not parabolic, they are spheroidal. The main dish is parabolic to collect parallel rays and focus them to a point, this gives a conical beam with a focal point in front of the sub-reflector. The sub -reflector then refocusses this divergent conical beam to a focal point at the LNB.

It would be interesting to see if a similarly constructed spherical mirror gave better results :)
 

Attachments

  • BN_PA-100573-EN.pdf
    40.4 KB · Views: 246

johnsattuk

Regular Member
Joined
Sep 4, 2004
Messages
433
Reaction score
2
Points
0
Age
88
My Satellite Setup
Topfield 5800 Echostar3000,DB7000, Relook 400S, Humax HDC2000, 55cm Fibo Gregorian dish with waveguide and Motek 2100 mod, 90cm Fibo Gregorian dish, 120cm Fibo Gregorian dish on a 1224 motor with waveguide
My Location
West Mids, UK
Just had a shave in my bathroom wall mounted concave mirror U-zzz

It's about 200 mm dia. and has a focal length of about 500 mm, maybe one of these sort of mirrors would be worth a try. Available quite easily and cheaply, also convex ones, which could be used on the reverse surface, so that you were not passing through the glass substrate :cool:

Just had a quick look on Ebay, interesting selection some very cheap.:)

Nice front surface concave mirror with micro adjustments :-worship
 

HB13DISH

Retired Mod
Joined
Aug 13, 2007
Messages
3,764
Reaction score
1
Points
0
Age
78
My Location
Middle East - Israel
Went back to basics and looked up the electrical resistivities of several metals just to get a quantitative idea about which metal is best to make a dish.
The property is called Electrical Resistivity in ohm-m. the smaller the better:
Aluminum 99.9% 29.000E-9
Aluminum Alloys 45.000E-9
Copper 99.9% 17.000E-9
Brass 62.000E-9
Silver 18.000E9
Steel 1020 169.000E-9
Iron 98.000E-9
Gold 22.000E-9

There is also another property called Conductivity.

Anyway, it looks like a good metal to use would be copper with 17.000E-9
compared to Aluminum with 29.000E-9
I thought gold was better than copper, but it looks like this is not true.

I don't know what type of Aluminum was used in your experiments, but I doubt if they are anything near a pure type.
If you want to experiment, then your best choice would be a DIY dish made of copper.
As you have strong satellites in your area, then perhaps a small dish of 45cm made of copper or copper sheets might give you some signal.
I think that with such a small dish the surface has to be quite smooth all over the dish, without any cuts, so that rules out the petals possibility.
Enjoy :)
 

johnsattuk

Regular Member
Joined
Sep 4, 2004
Messages
433
Reaction score
2
Points
0
Age
88
My Satellite Setup
Topfield 5800 Echostar3000,DB7000, Relook 400S, Humax HDC2000, 55cm Fibo Gregorian dish with waveguide and Motek 2100 mod, 90cm Fibo Gregorian dish, 120cm Fibo Gregorian dish on a 1224 motor with waveguide
My Location
West Mids, UK
HB13DISH said:
Went back to basics and looked up the electrical resistivities of several metals just to get a quantitative idea about which metal is best to make a dish.
The property is called Electrical Resistivity in ohm-m. the smaller the better:

Resistance (ohms) and Conductance (mhos) only have a meaning when allied to current (amps). The currents generated by the beams from the sat. are so small that I think the effect of different metals used in the constuction of a dish would be very difficult to ascertain. Also at these frequencies any currents/voltages generated travel about the surface (skin effect) with very little penetration. :)
 

Turok

Regular Member
Joined
Apr 25, 2005
Messages
2,237
Reaction score
2
Points
38
Age
36
My Satellite Setup
1,25 Fibostop
Jäger Smr 1224 & Smo 36 Dual Axsis Motor
Dynasat F1
Monterey 140
Drembox 800
sky Pace HD Box
Tagra 2,20 M Fullsize Dish
Echostar 2,40m Mesh for cband!
My Location
Austria
looks.great:)
today,i begining to to digging the hole for cm 3.0:)

in thailand,i see this system,on a backside of a mesh antenna!
how many db you have won now?
what the signal meter says?
when the sun shines,directly,into the antenna,maybe it reflect to much,and lnb could be gone coz of the heatreflection!
 

koansrc

Regular Member
Joined
Nov 14, 2006
Messages
315
Reaction score
0
Points
0
Age
60
My Satellite Setup
CM 3.0m @ 28.2 w PACE
My Location
Athens-Greece
johnsattuk said:
... sub-reflectors are not parabolic, they are spheroidal.

:-doh! well I guess that means I'm looking for something spherical again (!) to mold a dish from (great idea HB13DISH). But I figure it has to be 40cm in diameter with an f/d of either .4 or .6. Is the f/d calculation the same for spheres ???

To all those that claimed aluminium tin foil works for satellite dishes .... well it does. When I originally posted that it couldn't receive anything, I meant as a subreflector. I tried it as a plain dish today ( as suggested ) and aimed for 13o Hotbird. Easily locked on to various freqs. I suppose I ought to do a proper test and compare the aluminium foil dish to a proper one and benchmark it etc or even hook up a TV to see what exactly I'm getting, but ... I'm too busy looking out for something spherical about 40cm wide at present :)
Pictures from the tuning at 193o, 11770, H, 27500
 

Attachments

  • 09042008(002).jpg
    09042008(002).jpg
    92.9 KB · Views: 219
  • 09042008(003).jpg
    09042008(003).jpg
    128.8 KB · Views: 303

PSB

Satellite Head
Joined
Dec 13, 2006
Messages
33
Reaction score
0
Points
0
Age
53
Website
www.psbsatellite.com
My Satellite Setup
Dreambox DM 800HDse

Traxis DBS 6000 HD (Soon)

Matchbox Pro USB receiver

90cm and 1.8m dish

Ku and C-Band
My Location
Minneapolis/St. Paul USA.
THANKS for the pictures Koansrc, a wonderful project!
 

HB13DISH

Retired Mod
Joined
Aug 13, 2007
Messages
3,764
Reaction score
1
Points
0
Age
78
My Location
Middle East - Israel
Nice work koansrc. :)
Would be great if you can actually receive a TV channel using a DIY dish.
Why do you think that the tin foil dish in your experiment gave you a signal?
Was it because of the reflectivity of aluminum or because it is metal?
 

koansrc

Regular Member
Joined
Nov 14, 2006
Messages
315
Reaction score
0
Points
0
Age
60
My Satellite Setup
CM 3.0m @ 28.2 w PACE
My Location
Athens-Greece
HB13DISH said:
Nice work koansrc. :)
Would be great if you can actually receive a TV channel using a DIY dish.

I might try to hook it up to my digibox and telly. Who knows might even tempt me into getting the motor working on the 3m CM. Will be a pain to check many channels on a digibox though.

HB13DISH said:
Why do you think that the tin foil dish in your experiment gave you a signal?
Was it because of the reflectivity of aluminum or because it is metal?

I have no idea, but I realize now that I have used various terms to describe the covering and this may be causing confusion. The dish has a cardboard backing covered in "standard kitchen foil bought as a roll from the supermarket " with the more shiny side facing the satellite. ( FWIW ).
 

steffan_st

A bit enthusiastic
Joined
Feb 11, 2004
Messages
573
Reaction score
14
Points
18
My Satellite Setup
Gibertini OP 125 L, Smart Titanium lnb with CD-80 feedhorn, Moteck SG-2500, Azbox HD Premium+, some 5 meters of good quality coax
My Location
Sweden
Just want you to know that I'm one of those who encourage you in this project.

Obviously I'm not the only homebrewer in this forum,thank god!:)
 
Top