RobTi
Member
- Joined
- Aug 24, 2008
- Messages
- 28
- Reaction score
- 0
- Points
- 1
- Age
- 60
- My Satellite Setup
- none
- My Location
- Scotland
Okay can't get my head round this, the pictures and instructions are for elevation, but the scale on the motor is latitude.
My position is from dishfinder
Latitude: 55.7746°
Longitude: -4.0758°
Dish Setup Data-
Elevation: 21.0°
Azimuth (true): 145.0°
Azimuth (magn.): 148.7°
LNB Skew [?]: -18.8°
So according to the instructions i should set the Elevation to the latitude that i am at, so rounded up to 55.8*, now this means that my dish mount is up inside the motor flange.
Also it says for the declination angle to read your position of the scale attached and 35*- your declination angle, so for my latitude it would read 35-7.8=27.2.
So if this is right then i should set the motor up at 55.8* and the dish mount will be 27.2*, i have attached 2 pics of the mount then i can alter the bracket and get it fitted tomorrow
Robert
My position is from dishfinder
Latitude: 55.7746°
Longitude: -4.0758°
Dish Setup Data-
Elevation: 21.0°
Azimuth (true): 145.0°
Azimuth (magn.): 148.7°
LNB Skew [?]: -18.8°
So according to the instructions i should set the Elevation to the latitude that i am at, so rounded up to 55.8*, now this means that my dish mount is up inside the motor flange.
Also it says for the declination angle to read your position of the scale attached and 35*- your declination angle, so for my latitude it would read 35-7.8=27.2.
So if this is right then i should set the motor up at 55.8* and the dish mount will be 27.2*, i have attached 2 pics of the mount then i can alter the bracket and get it fitted tomorrow
Robert