axas mm clone & echostar

daxv8

Member
Joined
Dec 19, 2002
Messages
26
Reaction score
0
Points
1
Website
Visit site
My Satellite Setup
Dreambox 7020 250g& Triax 90cm ,Technomate 8000 HD , Echostar AD-3000, Superjack VBOX2 Triax 1.1m LNB Lemon mono block
My Location
London
Just purchased a Axas clone MM. I have a Echostar ad3000i.
The supplier stated that its pot luck if it works in Echostar. On instaling the cam the CI initializing message comes up and keeps comming back.
The cam had Penta 1.09 and worked o.k. on a Technomatic
receiver . I have returned the CAM and had a refund.
Will I have problems with an original MM in Echostar.
 

Nickolai

Regular Member
Joined
Jan 1, 2000
Messages
97
Reaction score
0
Points
0
My Location
Berkshire
You will have no problems with a genuine MM v.1.01 or v1.02, I know this from my own experience. I have no knowledge about compatibility of v.1.03 or v.1.04.

Clearly there are differences in AD3000 hardware and software, etc and also an element of luck ;).

Have a look at this SatNerds thread which should help you further with your decision process.
 

Old Satellite

Retired Mod
Joined
Jan 1, 2000
Messages
458
Reaction score
0
Points
0
MM 1.04 there are some strange occurances with an Echostar 3000 , generally it works well but occasionally you will see the initalising issues, and then you have to turn off the reciever and restart the beta software is generally less stable than the normal 0900 software etc.

regards

Old Satellite
 

daxv8

Member
Joined
Dec 19, 2002
Messages
26
Reaction score
0
Points
1
Website
Visit site
My Satellite Setup
Dreambox 7020 250g& Triax 90cm ,Technomate 8000 HD , Echostar AD-3000, Superjack VBOX2 Triax 1.1m LNB Lemon mono block
My Location
London
Many thanks for the replies. Nice link site Nickolai. Old Satellite do you mean the upgrad to 0901 BETA. I have just upgraded from the Echostar site so will be taking the reciever along to the dealer who will have a genuin m.m. It does seem a hit or miss with the version of Echostar 3000 you have. Is it dependent on the revision of mother board or the m.m. clone versions?
 

pajo100

Regular Member
Joined
Jan 1, 2000
Messages
121
Reaction score
0
Points
16
Age
78
My Satellite Setup
1.2 /1.8 Channel Master fully 36v motorised 58west to 42east Pace MSS500 Positioner
,Technomate 6900 Super HD ,Humax 8100PVR oh and a Amstrad Sky+ digibox.
My Location
Ireland
The problem is not with your receiver M8 it is the MM it needs to be modified with a new chip and then all will work , all that's left!!!!! PM me for a contact.
 
Top