Oily
Regular Member
- Joined
- Dec 23, 2005
- Messages
- 508
- Reaction score
- 1
- Points
- 18
- Age
- 55
- My Satellite Setup
- Satellite=Motorized Triax 88cm&a DM800HD with 500gb hd.Vu+ Duo
- My Location
- Radcliffe
Weather permitting
Finally,all my parts are here so i can set about installing my system.Here's my list:
1 Dish+motor,cable,cable clips,mounting bolts,home made T&K brackets,ty-wraps,heat shrink,F connectors.Either carbon fibre or ally mounting pole,depends on dish location.Drill+bit
2 Receiver
3 Satellite finder
4 Spirit level,will this be accurate enough?
Have i missed anything out?Don't want to be left trying to source a part on Sunday!
I've set the motor elevation/dish angles but the degree increments are not very accurate.My lat. is 53.3 so i've tried to set my ele. angle in between 36/37.Same goes for the dish,the angle is 22.4,so its set between 22/23 but how are you supposed to get these accurate if there's nothing in between each increment?
Thanks in advance
Finally,all my parts are here so i can set about installing my system.Here's my list:
1 Dish+motor,cable,cable clips,mounting bolts,home made T&K brackets,ty-wraps,heat shrink,F connectors.Either carbon fibre or ally mounting pole,depends on dish location.Drill+bit
2 Receiver
3 Satellite finder
4 Spirit level,will this be accurate enough?
Have i missed anything out?Don't want to be left trying to source a part on Sunday!
I've set the motor elevation/dish angles but the degree increments are not very accurate.My lat. is 53.3 so i've tried to set my ele. angle in between 36/37.Same goes for the dish,the angle is 22.4,so its set between 22/23 but how are you supposed to get these accurate if there's nothing in between each increment?
Thanks in advance