BigBrother

T

thedyson

Guest
ok so bigbrother is transmitting on eutelsat w2 @11304 v, well i can get it for about 5 seconds ...it then freezes and then comes up with scrambled signal, i have an aston seca cam v1.03 with card.

when i first set up a week ago it worked fine but now i cant get it...im using an echostar 3000ip...can anyone help?
 

2old4this

Honorary Admin
Joined
Jan 1, 1999
Messages
1,658
Reaction score
0
Points
0
My Location
Cloud Cuckoo Land
Nope, picture works fine on my ad3000ip...
Now if only I knew the correct audio PID...

I also have an Aston CAM (v1.03) but that's irrelevant since this signal is not encrypted.

Check your dish alignment and LNB/polarisor skew.
Which version of receiver firmware are you using (mine's v300).
Which symbol rate? (should be 30000)

2old
 
T

thedyson

Guest
im using v200 ive checked the dish alignment (well im getting the other channels on that sat) i have no skew as im using a universal LNB ....this is so strange as i could get it a few days ago when i first set up the receiver, but now it just says scrambled?
 

2old4this

Honorary Admin
Joined
Jan 1, 1999
Messages
1,658
Reaction score
0
Points
0
My Location
Cloud Cuckoo Land
you should in any case upgrade to v300...
try removing the CAM altogether...
2old
 

s*t*a*r*m*a*n

Regular Member
Joined
May 1, 1999
Messages
524
Reaction score
0
Points
0
Age
55
My Location
scotland
i came across the german big brother on hotbird. not a feed just a german channel in the clear and i thought it was much better than the uk version :-)
 

s*t*a*r*m*a*n

Regular Member
Joined
May 1, 1999
Messages
524
Reaction score
0
Points
0
Age
55
My Location
scotland
I think its transponder 89 on astra 19.2 EAST
but cant be one hundred percent certain. Its a german channel which shows the german version about 10 or 11pm uk time, atleast thats what i believe. If i come across it again and this information is wrong then i will post it here. Again this is not a feed but an actual tv channel showing the german big brother highlights etc. hope this helps.
 
Top