Bought a Funcard 4 what do i program it with?

gov400

Regular Member
Messages
99
Likes
0
My Satellite Setup
Dreambox 7020s
Gibertini OP120 Dish
STAB HH120 MOTOR
My Location
London
#1
Hi guys i got tired of my gold cards and bought a fun card 4 at a bargain price of 1.50. What sort of hex files do i program it with so i can clear viaccess channels? Do i use 6in 1? i Have no cam just viaccess embedded.
 

Topper

Amo Amas Amant Admin
Staff member
Messages
21,543
Likes
3,243
My Satellite Setup
IDD CI24 ECONO MM Penta 1.20 Galaxy II
1.2Mtr Polar MTG yes it has been on the arc for 25 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
#2
gov400 said:
Hi guys i got tired of my gold cards and bought a fun card 4 at a bargain price of 1.50. What sort of hex files do i program it with so i can clear viaccess channels? Do i use 6in 1? i Have no cam just viaccess embedded.
I am not aware that you can now gov400:confused
I would have said you would need an MR MRV or Dragon but if you have no cam slot it could be a problem. But I've no doubt l'll be corrected by someone with more knowledge of your particular setup.
 

gov400

Regular Member
Messages
99
Likes
0
My Satellite Setup
Dreambox 7020s
Gibertini OP120 Dish
STAB HH120 MOTOR
My Location
London
#4
thanks mate. I need to buy a cam which one do u recommend. As i dont have a cas 2 i need it to program via Laptop
 

McDude

Regular Member
Messages
76
Likes
0
#5
As garfield57 said via1&2 files for gold/funcards should work in your via cam.

matrix reloaded and revolutions cams can be updated using pcmcia slot of laptop although you do occassionally get problems when the cam refuses to initialise (but this is most likely with well used cams and not new ones), then you need to program with cas interface.

Alternatively if you want a well supported cam go for the dragon but you wont be able to use laptop or cas for this. The cam is updated using a dragon loader pic card or a fun7 card, so you will need to buy a programmer.
Your choice mate
 

gov400

Regular Member
Messages
99
Likes
0
My Satellite Setup
Dreambox 7020s
Gibertini OP120 Dish
STAB HH120 MOTOR
My Location
London
#6
thanks alot guys. I shall be getting a dragon cam as i have a dynamite programmer. Might as well get rid of these cards.
 
Messages
1
Likes
0
My Satellite Setup
fun card code for tps,multivision
#7
hi every one i have card programmer but i don't know where to find the files 6in 1 to programme my card so please could you tell me where i can find the files or web site ?
thanks in advance.
 

Topper

Amo Amas Amant Admin
Staff member
Messages
21,543
Likes
3,243
My Satellite Setup
IDD CI24 ECONO MM Penta 1.20 Galaxy II
1.2Mtr Polar MTG yes it has been on the arc for 25 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
#8
Welcome to the forum webb01

Please try not to hijack existing threads to post a question, start a new one.
The answers you need will be found in the links forum of the board, formerly nobbly's links.:)
 
Top