albert_muja
Albert_8181
- Joined
- Apr 3, 2008
- Messages
- 6
- Reaction score
- 0
- Points
- 0
- Age
- 42
- My Satellite Setup
-
Broad Logic 2030 PCI DVB Card with embeded card-slot;
Satellite Dish Echostar;
Echostar DSB808 satellite receiver;
PC Intel 3.2 Ghz, 2 Gb DDR2 Ram, 160 Gb HDD, Tv Tunner FlyTV P30, Monitor Eizo TFT 18.4".
- My Location
- MTr
Dear friends,
I have been gifted with Broadlogic PCI DVB Card (labelled Z68G72) and I installed it on my computer. The Image of the card is linked here: _http://www.autv.org/tech/satellite/g/equipment/tuner/bl2030b_s.jpg
I had problems to identify the model of the Card. The reasoning I am asking this question is that when i ask for the drivers, the drivers were named after V@Box ABA2030 Adapter.
Since i have WINXP installed, the normal Driver installation installation was not possible because it would not recongnize the the connection between the card and ini.files. Instead I have chosen the classic version by selecting device drivers - have Disk - V@Box ABA2030. Following the installation I did not have any problems as in the Device Manager the card was identified as network card under the name V@Box ABA2030.
However, when I install the Broadlogic application the card is not recognized. In addition when i also installed ProgDVB i cannot start the program because it is indicating the lack of BDA Device, the drivers which I do not have.
Can someone help me or guide me how should i make the thing workable. Please note that there are I have also my TV Tuner installed on my computer.
Best,
Albert
I have been gifted with Broadlogic PCI DVB Card (labelled Z68G72) and I installed it on my computer. The Image of the card is linked here: _http://www.autv.org/tech/satellite/g/equipment/tuner/bl2030b_s.jpg
I had problems to identify the model of the Card. The reasoning I am asking this question is that when i ask for the drivers, the drivers were named after V@Box ABA2030 Adapter.
Since i have WINXP installed, the normal Driver installation installation was not possible because it would not recongnize the the connection between the card and ini.files. Instead I have chosen the classic version by selecting device drivers - have Disk - V@Box ABA2030. Following the installation I did not have any problems as in the Device Manager the card was identified as network card under the name V@Box ABA2030.
However, when I install the Broadlogic application the card is not recognized. In addition when i also installed ProgDVB i cannot start the program because it is indicating the lack of BDA Device, the drivers which I do not have.
Can someone help me or guide me how should i make the thing workable. Please note that there are I have also my TV Tuner installed on my computer.
Best,
Albert