C-band on 1.2m offset andrew cm dish

[Turok]

if i rember right,fortec star,has to diferent versions,of the ultra modell,one for europe,that supports only pal,and the other for ntsc region only usa!
also,it is posible,to change firmware,into each modell,but you must change the bootloader first,otherwise,the receiver,will not boot anymore!

 

[robyn]

Thank you pride21, can you please show me the satellite setup on the technomate menu Thank you very much. :-worship

hi robyn yes i use a technomate 1000d and a fortecstar 5100plus + ultra for c-band

 

[okeme]

please i have what you said but it dos not work can u explain more about how you made the lnb hoder thank

 

[pride21]

hi robyn you you press the menu button and go in to satellite setup,you should have a users manual how to setup lnb type.i use an old analogue receiver to go from one sat to another,you probably will use usals

 

[robyn]

thank you pride21, one las question can you get a channel name canal1 internacional, that one is on intel 805 at 55.5W and 4030V 3000 because I dont. thank you.. V

hi robyn you you press the menu button and go in to satellite setup,you should have a users manual how to setup lnb type.i use an old analogue receiver to go from one sat to another,you probably will use usals

 

[I-and-I]

Hello Neophasis,

Could you please let me know where I can get the C band feed and lnb holder you have in the picture from to buy?

 

[Robbo]

He won't answer, he was booted off a some while ago. ;)

 

[Satcom1]

Google WSI or galaxy marketing