Can anyone help with humax 5100

[naloxan]

Hello all
I have humax 5100 .. then by mistake upgraded to humax 5400 System ID software ,, so this receiver become unstable and when I tried to return to old software its give me the code error “E-ID”.
My receiver information now is
S/W DFE 10500
H/W DFE 10500
SYSTEM ID 00100600
so is there any one have solution??
Thanks all

 

[steve-j]

While searching for help on my own problem I came across some info which might be of use.

Ran a search on "error codes" and in FAQs and glossary found a list of error codes for humax recievers posted by 2old4this (list includes a few solutions).

Might at least point you in the right direction?

 

[lost_chain]

just download the hdsysid from www.humax-zone.net then download a firmware for 5100 dci6+ is good then change the sys id of that firmware using hdsysid to the one u mentioned then download this to the stb and u know got 5100 firmware but with sysid of 5400 firmware
\\
method 2
download a sys id file to the stb so know changed the sys id of ur reciver
then download the firmware of ur reciver
all tools u need from www.humax-zone.net

 

[proof]

just download the hdsysid from www.humax-zone.net then download a firmware for 5100 dci6+ is good then change the sys id of that firmware using hdsysid to the one u mentioned then download this to the stb and u know got 5100 firmware but with sysid of 5400 firmware
\\
method 2
download a sys id file to the stb so know changed the sys id of ur reciver
then download the firmware of ur reciver
all tools u need from www.humax-zone.net

Are you sure that it will work? you know think about it...
My friend have the same problem 5100 box with 5400 software incomplete download and the humax does not work... i hope that it help... i will try your help... thanks lost chain

proof

 

[mentuchimikesmit]

hi , good night, I hope to morrow will have an answer about humax va-fox
thans in advance.(is to late in Spain is two to two after noon) regards.