Can I replace EMTech FTA V100 with firmware of starsat 200ci?

R

reza82

Member
Messages
25
Likes
0
#1
I have a receiver that use "EMTech FTA V100" firmware. My hardware Version is 200 and my Model ID is A111.

Can I upgrade my receiver with firmware of starsat 200CI?

Please aware me.

 
T

tamazgha2003

Regular Member
Messages
241
Likes
0
My Satellite Setup
dreambox 500s
My Location
tamazgha
#2
yes you can, no problem
use emedit and erase before upgrade
 
R

reza82

Member
Messages
25
Likes
0
#3
I did it but I could not upgrade my receiver. Error was my problem at final stage of uploading new firmware
 
T

tamazgha2003

Regular Member
Messages
241
Likes
0
My Satellite Setup
dreambox 500s
My Location
tamazgha
#4
try again
start emedit first thing you do is unplug the receiver then push "erase" and plug in the receiver and WAIT.
then shut off the receiver and start again chose firmware and push "write" and WAIT
when the receiver marks END
now your reciver is up to date
 
R

reza82

Member
Messages
25
Likes
0
#5
dear tamazgha, I have done all this instructions but these did not help me.
I would to say some notifications that may be helpful for you to guide me and others.

1_when I erase flash memory no message appears to notice me it is finished, I end the process manually by unpluging receiver after a moment.
2_ My receiver is not starsat, My receiver has EMTech firmware that is common between starsat and my receiver. ( My receiver is Logix 6000FTA )
3_ I tried upgrading my reciver by firmware of starsat 120 1M. upgrading process goes to final satge but at final alert it shows error, this process with firmware of satrsat 200ci was visibly wrong because during uploading firmware to reciever counter of receiver was showing differnt percentage of uploading from upload percentage of EMedit.
 
T

tamazgha2003

Regular Member
Messages
241
Likes
0
My Satellite Setup
dreambox 500s
My Location
tamazgha
#8
need more info of your receiver,i dont think you can use firm of emtech or starsat
send me a picture of your receiver-firmware
 
R

reza82

Member
Messages
25
Likes
0
#9
Dear tamazgha
As I said, the products of eMTech have common specification to starsat, and my receiver "Logix" has too Likeness and common specifications to emtech receivers.
Please visit this links to see my receiver and emtech receivers.

http://sat-receiver-world.com/pi1531775425.htm?categoryId=112
http://sat-receiver-world.com/pd-402149413.htm

I have Transfered firmware of my receiver to PC and opened it by binary editor software. It shows me the firmware is EMTech.

In this link you will see a receiver which is totally similar to my receiver with emtech brand on it. "on top of emupgrade picture,at the end of the page"
http://www.satellite-heaven.de/index.htm?jump=Receiver/emtech.htm
 
A

agmasd

Member
Messages
8
Likes
0
My Satellite Setup
internet & engineer
My Location
Egypt
#10
use software of condor h/w 200 ID E224
 
D

dugizul

Regular Member
Messages
52
Likes
0
#11
pls where can i get flash dump of logix 6000fta.


my email;dugizul*yahoo.com
 
Top