yeshu26
Regular Member
- Joined
- Feb 28, 2010
- Messages
- 134
- Reaction score
- 0
- Points
- 16
- My Satellite Setup
-
Amiko Alien HD box
Self assembled pc:
AMD 3.2 GHZ dual core 64 bit
Gigabyte motherboard
4 GB DDR2
RAID 1 MIRROR 500 GB
Slave Drive: 500 GB IDE
Samsung optical drive
Benq HD 24 inch monitor
- My Location
- Aberdeen
Ok Lads!
This is an insane idea, but perhaps you can help to make it sane.
Background:
a. I have two dishes which are permanently installed. One is facing 5 E and other Sky. These two dishes are physically far from each other. Two respective signal cables run into the house.
b: The diseq switch is inside the house (remember that my dishes are far from each other)
THe two signal cables obviously go into the diseq switch, and eventually into the the box.
My big idea:
I want to get 13 E, by putting up one of those multi lnb "arches", onto the sky dish.
But in order to reduce the number of holes into the landlords wall. I want to put another diseq switch outside the house. Say the Sky dish will have two LNBs. one for sky, one for Hotbird, then on the same dish one diseq switch.
This signal cable will carry the 13 e and sky signals into the house.
This signal cable will then be connected to the "original diseqc switch". The original diseq switch will then recieve 5e, 13, and 28.2 e signals respectively.
Is it possible? If yes, how to do it?
Cheers
This is an insane idea, but perhaps you can help to make it sane.
Background:
a. I have two dishes which are permanently installed. One is facing 5 E and other Sky. These two dishes are physically far from each other. Two respective signal cables run into the house.
b: The diseq switch is inside the house (remember that my dishes are far from each other)
THe two signal cables obviously go into the diseq switch, and eventually into the the box.
My big idea:
I want to get 13 E, by putting up one of those multi lnb "arches", onto the sky dish.
But in order to reduce the number of holes into the landlords wall. I want to put another diseq switch outside the house. Say the Sky dish will have two LNBs. one for sky, one for Hotbird, then on the same dish one diseq switch.
This signal cable will carry the 13 e and sky signals into the house.
This signal cable will then be connected to the "original diseqc switch". The original diseq switch will then recieve 5e, 13, and 28.2 e signals respectively.
Is it possible? If yes, how to do it?
Cheers