channel master 1.2 dish and DiSEqC

[billben]

hello to all members


Can you use a channel master 1.2 dish with a diseqc system

my jaeger mount got damage in the recent winds and thinking of trying the diseqc system.

Any advice would be welcome


thanks

 

[BGonaSTICK]

Too big and heavy IMHO.

 

[rolfw]

Definitely, requires a 36v motor.

 

[RaiUn0]

Definitely, requires a 36v motor.

Hi rolfw, and everyone!

I've had more than a year gap with satellites. now back with lot to catch up..

I've seen H-H motor advertised as "JACK21 Manhattan H-H 120 DisEqC up to 1.2m dish" Are they 36v motors? I thought there were between 12v - 18v
Can this motor drive the Triax1.1 which I'm looking to get as soon as my Sony32" tv arrives sometime tomorrow or near future.

 

[georgia_grrl]

a lot of DisEqC motors say they will take a 1.2m dish, but with the current weather and what i've read elsewhere of the demise of many motors with only 90cm dishes on, i wouldnt think of putting anything more than 90 on a DisEqC motor. in fact i've got plans already (for later in the year, once i'm settled in with this stuff) to replace my dish and motor with a slightly larger one and 36v positioner.

 

[poolshark]

Hi rolfw, and everyone!

I've had more than a year gap with satellites. now back with lot to catch up..

I've seen H-H motor advertised as "JACK21 Manhattan H-H 120 DisEqC up to 1.2m dish" Are they 36v motors? I thought there were between 12v - 18v
Can this motor drive the Triax1.1 which I'm looking to get as soon as my Sony32" tv arrives sometime tomorrow or near future.

ive just ordered a polar mount that bolts onto a triax 1.1m dish..and a 12 inch actuator arm £82.95.... and a vbox 2 to drive my triax dish

 

[Channel Hopper]

ive just ordered a polar mount that bolts onto a triax 1.1m dish..and a 12 inch actuator arm £82.95.... and a vbox 2 to drive my triax dish

Thats the best way to go, however without seeing which polarmount is being offered, the 12 inch motor may not be large enought to get the satellites on the whole arc.

The CM 1.2m polarmount requires the 18 inch to get 70 degrees of coverage

 

[M1JWR]

You need heavy duty gear like this:

 

[vinny bhoy]

ive just ordered a polar mount that bolts onto a triax 1.1m dish..and a 12 inch actuator arm £82.95.... and a vbox 2 to drive my triax dish

do u know anyone in derry who could install a dish for me and dreambox? im also in derry but moving to letterkenny, gonna have a look into it and cud prob set it up with the help of a friend after some research but would rather get someone who has done it before

cheers

 

[satelliteman]

vinny bhoy

This thread is well over 5 years old now. If you require an installer, please start a new thread in the installer wanted section

Thread closed.