Channels with Humax Emu 1.5

wakos97

Member
Joined
Jun 15, 2004
Messages
3
Reaction score
0
Points
0
Age
59
Friends
My first, it's week now since I jumped in the receiver/keys game. Got my Humax 5400 upgraded to Toh 3.2 emu 1.5c in few hours :)
Got Samy-Humy to send keys to my receiver, took a bit longer :confused due to something with Serial port and XP, after 6 hours switched to an older win2k machine, worked magic. A couple of tips here though:
- Mcfee antivirus usually has problems with serial ports (the email scanner in specific) if you're having problem, just kill the mcvsEscn.exe.
- Another tip: resetting the receiver seems to solve the problem with XP at times, also complete turn off/on
- Dud Humac toolbox is magic

Ok, my question now, what channels should i be looking for (with keys that works on emu). Also what are those pmct updates, what are they for?

thanks
wakos, from cairo/egypt
 

BertSnelweg

Member
Joined
Jun 19, 2004
Messages
2
Reaction score
0
Points
0
Age
51
My Location
Netherlands, Boxmeer
1a take a IRDETO card PUT THIS IN THE CARDREADER OF THE HUMAX
(i.e. fun, gold of piccard)

example:
fun6in1atmega163mach1 18[1].6.2004\fun6in1atmega163mach1 18[1].6.2004\1-mickey6in1_V4.3Flash.hex on a funcard is sufficient.

1b (Take care of the newest settings in the Humax *.hnf-file)

2 connect your humax5400 to the pc with a nullmodem cable
3 turn OFF your humax (button backside)
4 look for ToH3.2_HoT1.5c.zip firmware at the internet.
5 take program wdn4oak+ (install at pc and start) [/color]www.humaxdigital.com/HCSA/download/WDN4OAK+.zip
6 click at yellow folder for information (humax toolbox)
7 search ToH3.2_HoT1.5c\ToH3.2_HoT1.5c.hdf and click open
8 click at green man and download
9 turn on humax end wait until it is finished completely with programming, when the humax is ready programming you see END at the humax.
10 then push standby button

11 look at the internet for DSR 9500 EMU Ed30 for Humax
( DSR 9500 EMU Ed30 aldo at Humax Toolbox [/color]www.dudewarez.pwp.blueyonder.co.uk/downloads/HumaxToolbox.zip12 look for the last keyfor this EMU (mach1 (key.bin) somewhere at the internet, just needs the right file, or enter it yourself)
i.e.:
fun6in1atmega163mach[1] 18.6.2004\Key.bin\key.bin
13 open DSR 9500 EMU Ed30 for Humax at your pc.
14 humax must be turned ON!!!! <-- so give picture!!
15push at open file
16 look for key.bin
17 select: ?/default settings/humax in DSR 9500 EMU Ed30
18 then press write
19 wait until text appears (counter left top)

ok that's done, 2 more things
20 take the remote control turn off and on the humax one more time
21 go to menu-TOH-Config
22 NOW select at the bottom setting CAID PRESELECT to EMU+K
23 take out the fun card and put it back (or at remote: 0-rcl)

That's all folks!

Greetz,

Bert Snelweg, Netherlands
 

wakos97

Member
Joined
Jun 15, 2004
Messages
3
Reaction score
0
Points
0
Age
59
thankx bert
I more or less did that, however, your step-by-step is great for new people, I'm sure it will become very famous :-)..
My questions still,
1-what channels are there on the usual key.bin update, any listing somewhere.
2-is the key.bin enough or should I look for other sources (softcam, 6in1, etc.)?
3- are Taquilla, sky, prima included in those files?

thanks again
 

flking

Member
Joined
Jul 24, 2004
Messages
1
Reaction score
0
Points
0
Age
39
i like the your step by step guide m8, it was very helpful
 

sha2y

Member
Joined
Oct 7, 2004
Messages
2
Reaction score
0
Points
0
Age
41
Hello wakos...Im Ramy from cairo as well...I need to ask how can I upload new keys to open Multivision and EuroSport to my Humax 5400. What program should I use and how can I get the Keys to upload them to my receiver.Please reply on my email sha2y@hotmail.com
 

yakoubi

Regular Member
Joined
Sep 6, 2004
Messages
41
Reaction score
0
Points
0
Age
60
Dear sha2y
please look at Bertsnelweg step by step, I think is the best one to learn how to load the key etc
Thank you
 

sha2y

Member
Joined
Oct 7, 2004
Messages
2
Reaction score
0
Points
0
Age
41
Hi all, I have a major problem with my Humax 5400. Its that I have DSR 9500 EMU Ed30.exe and I wanted to upload the new keys(Keys.bin) to my receiver. It does upload the new keys but the channels still dont open. I think I upload the keys incorrectly so could someone please tell me what is the trick in uploading the keys to my receiver. You could reply to my email: sha2y@hotmail.com. Thanks.
 

makster12

Member
Joined
Dec 22, 2004
Messages
1
Reaction score
0
Points
0
Age
43
where can i find introductory tutorials on how to update the recever software and uploading the keys? i have the humax toolbox software but most of the software i can't use. the only thing i can do is to get the channels from the recever using humbox but i don't know how to upload them back to the receiver once i organized them. any help would be greatly appreciated.

does anyone know where can i get organized and grouped (genres done) channel files that i can upload directly to my humax 5400 receiver???
 

heshamsbr1

Member
Joined
Dec 22, 2004
Messages
1
Reaction score
0
Points
0
Age
52
i want to upgrade the latest firmware of humax 5400

can you help me



wakos97 said:
Friends
My first, it's week now since I jumped in the receiver/keys game. Got my Humax 5400 upgraded to Toh 3.2 emu 1.5c in few hours :)
Got Samy-Humy to send keys to my receiver, took a bit longer :confused due to something with Serial port and XP, after 6 hours switched to an older win2k machine, worked magic. A couple of tips here though:
- Mcfee antivirus usually has problems with serial ports (the email scanner in specific) if you're having problem, just kill the mcvsEscn.exe.
- Another tip: resetting the receiver seems to solve the problem with XP at times, also complete turn off/on
- Dud Humac toolbox is magic

Ok, my question now, what channels should i be looking for (with keys that works on emu). Also what are those pmct updates, what are they for?

thanks
wakos, from cairo/egypt
 

mawahed

Member
Joined
Jan 14, 2004
Messages
2
Reaction score
0
Points
0
Age
58
Dear i have Tux3.3Hot3.0 and i've done all the steps and cyfra is working fine and TPS also... but when i turned off the humax and reopen it again. the channels does not work again, do i have to reprogram each time i turn it off. or i miss one step......

Please advise
 

psats

Regular Member
Joined
Nov 12, 2002
Messages
251
Reaction score
0
Points
0
mawahed said:
Dear i have Tux3.3Hot3.0 and i've done all the steps and cyfra is working fine and TPS also... but when i turned off the humax and reopen it again. the channels does not work again, do i have to reprogram each time i turn it off. or i miss one step......

Please advise
that only happens when you turn the receiver off at the plug .
to stop the humax looseing its settings turn the humax off with the remote
then the humax stores the key bin

:)
 

mawahed

Member
Joined
Jan 14, 2004
Messages
2
Reaction score
0
Points
0
Age
58
psats said:
that only happens when you turn the receiver off at the plug .
to stop the humax looseing its settings turn the humax off with the remote
then the humax stores the key bin

:)
Do I have to use Pmc Tables from Xamuh as example after this
 

podilamaya

Member
Joined
Feb 8, 2005
Messages
2
Reaction score
0
Points
0
Age
46
Hi Guys,

I’m very new to this sat cracking game. I got Humax IRCI-5400Z SAT receiver (no additional cards etc). Currently I’m watching free channels of PANAMSAT 7, 10 (68.5E). I’d like to watch some channels which are encrypted by “IRDT” (eg. Discovery Channel”). Can anybody let me know how adding keys do and play such channels?



Thanks in advance
 

babyjojo

Member
Joined
Feb 12, 2005
Messages
2
Reaction score
0
Points
0
Age
48
can you pls let me know if this is apllicable to the 5400Z model. i can't upload the Toh*.hdf with WDN4OAK+.
10x in advace
babyjojo:-ohmy


BertSnelweg said:
1a take a IRDETO card PUT THIS IN THE CARDREADER OF THE HUMAX
(i.e. fun, gold of piccard)

example:
fun6in1atmega163mach1 18[1].6.2004\fun6in1atmega163mach1 18[1].6.2004\1-mickey6in1_V4.3Flash.hex on a funcard is sufficient.

1b (Take care of the newest settings in the Humax *.hnf-file)

2 connect your humax5400 to the pc with a nullmodem cable
3 turn OFF your humax (button backside)
4 look for ToH3.2_HoT1.5c.zip firmware at the internet.
5 take program wdn4oak+ (install at pc and start) http://www.humaxdigital.com/HCSA/download/WDN4OAK+.zip
6 click at yellow folder for information (humax toolbox)
7 search ToH3.2_HoT1.5c\ToH3.2_HoT1.5c.hdf and click open
8 click at green man and download
9 turn on humax end wait until it is finished completely with programming, when the humax is ready programming you see END at the humax.
10 then push standby button

11 look at the internet for DSR 9500 EMU Ed30 for Humax
( DSR 9500 EMU Ed30 aldo at Humax Toolbox www.dudewarez.pwp.blueyonder.co.uk/downloads/HumaxToolbox.zip )
12 look for the last keyfor this EMU (mach1 (key.bin) somewhere at the internet, just needs the right file, or enter it yourself)
i.e.:
fun6in1atmega163mach[1] 18.6.2004\Key.bin\key.bin
13 open DSR 9500 EMU Ed30 for Humax at your pc.
14 humax must be turned ON!!!! <-- so give picture!!
15push at open file
16 look for key.bin
17 select: ?/default settings/humax in DSR 9500 EMU Ed30
18 then press write
19 wait until text appears (counter left top)

ok that's done, 2 more things
20 take the remote control turn off and on the humax one more time
21 go to menu-TOH-Config
22 NOW select at the bottom setting CAID PRESELECT to EMU+K
23 take out the fun card and put it back (or at remote: 0-rcl)

That's all folks!

Greetz,

Bert Snelweg, Netherlands
 

babyjojo

Member
Joined
Feb 12, 2005
Messages
2
Reaction score
0
Points
0
Age
48
note that i noticed having loader "DL" and not H.208, if this makes any difference

babyjojo said:
can you pls let me know if this is apllicable to the 5400Z model. i can't upload the Toh*.hdf with WDN4OAK+.
10x in advace
babyjojo:-ohmy
 

psats

Regular Member
Joined
Nov 12, 2002
Messages
251
Reaction score
0
Points
0
babyjojo said:
note that i noticed having loader "DL" and not H.208, if this makes any difference
this was posted by TNT

Go to STB Status in the humax menu, if it has

Software version HIC 1.05.00

Loader version

H2.08
H1.37
L1.37
L2.08

Then you can patch it with the latest firmware.

If it has

Software version ZIC 1.05.01

Loader version 4.15.8.8

You cant patch it without it first being flashed using a z-board.


TNT

Hope that helps
 

Araz_a

Member
Joined
Mar 10, 2005
Messages
2
Reaction score
0
Points
0
Age
41
My Satellite Setup
machal
Hello friends....

I am new with this site & this work..I mean uploading humax5400
I did with my humax till no.10 ..(as babyjojo & Bert Snelweg told)
but now I do`nt know how I can get this EMU... & how I can use this BIN file...
or somethings like these.
what can I do...please help me step by step..whit this work..!!! I AM NEW...

THANKS A LOT FOR YOUR INFORMATION..!!!
 

psats

Regular Member
Joined
Nov 12, 2002
Messages
251
Reaction score
0
Points
0
Araz_a said:
Hello ...:confused

I am new with this site & this work... please ........!!!tell me how I can use this BIN file... I mean with wich program.....!!! my reciver : humax5400

help plz... thanks a lot...!!

Araz
this is one editor, there are others

:)
 
Top