Conax - with Echostar 3000Ip Viacess

Messages
10
Likes
0
My Satellite Setup
hI
My Location
38400
#1
Hi guys , can somebody solve my problem ?

I have Digitalb -card with Conax module , and I am using Echostar 3000Ip Viacess receiver ,but the problem that I have is that when i watch this Digitalb chanels every 20 - 30 seconds chanels are freezing for 2-3 seconds.

Thnx in advance.
 

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Messages
24,633
Likes
5,372
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK South
#2
Some receivers do have trouble with the high symbol rate of the channels on this package, Manhattan springs to mind, but I would hedge my bets on incompatibility of the Conax Cam with the receiver.
Have you got the latest Echostar Firmware - (series 110) installed ?

Have you tried another receiver ?
 
Messages
10
Likes
0
My Satellite Setup
hI
My Location
38400
#3
Yes I have tried ,in another receivers is working fine,but in this Echostar 3000Ip Viacess I have this problem ,and I have the latest software for this receiver ( series 1000 ),as i know this series 110 is only for Echostar 3000 but not for 3000 Ip Viacess receivers.

Thnx.
 

Burnham Beech

Specialist Contributor
Messages
1,013
Likes
39
#4
I'm into wild guesses here.

Firstly, 1000 is the latest for Echostar 3000Ip Viacess and is ok for the 32000 SR used by DigiAlb - as I'm sure you have checked already the DigiAlb FTA channel is ok.

Working for 20 - 30 seconds then freezing for 2-3 seconds sounds like a Control Word problem. To eliminate the obvious - what version conax cam are you using - have you removed any card in the embedded via slot and any cam in the other CI slot.
 
Messages
10
Likes
0
My Satellite Setup
hI
My Location
38400
#5
I have tried also with Dragon and Matrix card , but same problem ....
 

Burnham Beech

Specialist Contributor
Messages
1,013
Likes
39
#6
Nope, no idea. You seemed to have eliminated the obvious answers with your extra tests.

All I can add is that the Echostar 3000ipva worked fine with the unofficial conax cards that were available last winter. But I have never tried a DigiAlb card.
 

jimbo

Specialist Contributor
Messages
3,482
Likes
1
My Satellite Setup
Sky HD, TM6800HD, Manhattan Plaza ST550 and TM1500 CI+. 1.0m dish and 36v motor, Panasonic DVD HDD recorder and Panasonic video/DVD recorder. Sony G800 HD TV stand/surround system + Sony KDL40W2000. Infinity USB, Elvis, CAS1, CAS2.
My Location
Greater London
#8
I've had no problems with a digitalb card in a Manhattan ST550. I used a Technisat Technicam (Conax) with is cheaper than the Eurocam version 4.01 or the 4.0e modified.
 
Top