moonsat777
Member
- Joined
- Jun 8, 2008
- Messages
- 14
- Reaction score
- 0
- Points
- 0
- Age
- 62
- My Satellite Setup
- FortecPassionHD, QualitvQS1080IR, VantageX201SCI, Motorised 1m dish, 8w to 28e
- My Location
- Wales
Just received this cam and it works fine. I came preloaded with Underworld 113. I've hunted on a lot on forums for the following answers but found nothing:-
1)On the cam itself there's a plastic ON / LOCK thingy. Whats that for? What should it be set to?
2)Interogating the CAM from the Fortec menu, I see the CAS for conex,seca,irdeto,viac,crypto are set to OFF. Should these be set to ON or is this feature only applicable when using smarcards?
3)Looking in 'configuration' the N2 AU is set to ON but within that the Fixed CW is set to OFF. Should this be ON?
What does Fixed CW mean?
Appeciate any info on the above and any aditional info/links you might have for the CAM parameters when looked at through the Fortec menu.
Ta
1)On the cam itself there's a plastic ON / LOCK thingy. Whats that for? What should it be set to?
2)Interogating the CAM from the Fortec menu, I see the CAS for conex,seca,irdeto,viac,crypto are set to OFF. Should these be set to ON or is this feature only applicable when using smarcards?
3)Looking in 'configuration' the N2 AU is set to ON but within that the Fixed CW is set to OFF. Should this be ON?
What does Fixed CW mean?
Appeciate any info on the above and any aditional info/links you might have for the CAM parameters when looked at through the Fortec menu.
Ta