digital 600 dead

065216463

Member
Joined
Apr 25, 2006
Messages
1
Reaction score
0
Points
0
Age
33
My Satellite Setup
BORJAN
My Location
SERBIA
Can anyone help me please ??
I need direction how can insert new software u my receiver
digital 600 !!!
thank you all
 

slugworth

Regular Member
Joined
Jan 23, 2004
Messages
153
Reaction score
2
Points
18
My Satellite Setup
gsky v7
My Location
New England
People don't unsolder surface mount chips anymore, they use the
jtag port with jtag size firmware.
 

joshuatronic

Regular Member
Joined
Mar 9, 2005
Messages
68
Reaction score
0
Points
0
Age
59
My Satellite Setup
98
well, then u can call it the old school way, it still works. secondly, in order to use jtag and Jkeys software u have to know the receivers IRD number. do u know whats the IRD for Digital 600? if u know how to get IRD for any kind of receiver id like to hear that myself. your help would be invaluable!!
 

slugworth

Regular Member
Joined
Jan 23, 2004
Messages
153
Reaction score
2
Points
18
My Satellite Setup
gsky v7
My Location
New England
To desolder/solder a flash chip properly you would need a hot air
desoldering station, not every hobbyist has one.
Then you would need a programmer that handles that chip.
I would only attempt that if I had a 1meg flash and planned to
upgrade to a 2meg flash chip.
Jkeys was originally written for north american echostar receivers,
not fta receivers.
I use either skymax1.3 or jtag_up for fta receivers that are jtaggable.
No need to play with .def files and you don't have to ground pin 115
on the sti5518 to erase/write.They are finicky about the operating
system, I use win98 but others claim they work with winxp.
I assume the 600 has a 1meg flash, which the previous programs handle.
You would also need the jtag size firmware to install, preferrably rigged
for the provider you want to watch.
 

slugworth

Regular Member
Joined
Jan 23, 2004
Messages
153
Reaction score
2
Points
18
My Satellite Setup
gsky v7
My Location
New England
I have seen bad power supplies also, if that is the problem.
I know hevet and microyal had power supplies with the wrong
voltage rating capacitors in two spots, 16v instead of 35v.
I would check the power supply for pregnant caps, they will
have bloated tops,if the receiver just died by itself.
I believe there are schematics around for the hevet power supply.
 
Top