css_jay99
Regular Member
- Joined
- Oct 15, 2002
- Messages
- 52
- Reaction score
- 0
- Points
- 0
- Website
- Visit site
- My Location
- Bromley london
Hi, I am having problems with my echostar DSB2200 receiver and Stab diseqc motor.
It was all working fine until yesterday when the motor just parked the dish at the most easternly travel of the diseqc motor.
I have tried selecting diff satelites on receiver but the motor just does not move. I have even tried switching off the receiver from the mains to see if it will reset the motor but no luck
Is there any way of resetting the motor either via the receiver or just the mount.
The echostar dsb2000 does not seem to have a menu option for resetting the diseqc motor
cheers
css_jay99
It was all working fine until yesterday when the motor just parked the dish at the most easternly travel of the diseqc motor.
I have tried selecting diff satelites on receiver but the motor just does not move. I have even tried switching off the receiver from the mains to see if it will reset the motor but no luck
Is there any way of resetting the motor either via the receiver or just the mount.
The echostar dsb2000 does not seem to have a menu option for resetting the diseqc motor
cheers
css_jay99