DiseqC Motor internal comparison pictures

rolfw

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,870
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
We can hopefully in this thread, discover who makes what. :)

This is the Technomate 2200.

Not badly made, runs quietly.
 

Attachments

CROSSBONES

CROSSBONES

Specialist Contributor
Messages
2,003
My Satellite Setup
1.2m channel master on a jeager 1224 motor. 55cm fibo Gregorian. VU solo2.
My Location
S.Wales
Its said to turn slightly faster than the Moteck`s!

Thanks for the dissection and invalidating your warranty for us rolfw;)
 
rolfw

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,870
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
I'm pretty convinced that it is a moteck, just the latest model. :)

And also a Fortecstar Turner. :)
 

Attachments

rolfw

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,870
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
This is a broken one, a few differences between this and latest models.
 

Attachments

rolfw

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,870
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
In fact, after taking it apart and putting it back together, it is now working again. :-rofl2

It's been sat in my garage for two years. :)
 
satelliteman

satelliteman

Administrator
Staff member
Messages
12,017
My Satellite Setup
See signature
My Location
East Midlands, UK & Lanzarote, Canary Islands
What was it doing wrong Rolf?
 
rolfw

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,870
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
It just wouldn't move, but it was a couple of years ago, at the time I just replaced it.
 
satelliteman

satelliteman

Administrator
Staff member
Messages
12,017
My Satellite Setup
See signature
My Location
East Midlands, UK & Lanzarote, Canary Islands
Might of just been a dj on the circuit board.
Suppose it will sit in the garage for another 2 years :-rofl2
 
rolfw

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,870
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
Yes. . . . . . . . . . . . . . . . . . . . . .Or longer. :-lmao
 
CROSSBONES

CROSSBONES

Specialist Contributor
Messages
2,003
My Satellite Setup
1.2m channel master on a jeager 1224 motor. 55cm fibo Gregorian. VU solo2.
My Location
S.Wales
A result then rolfw!:)

Might of just been a dj on the circuit board.
Who was it Pete tong?:-rofl2
 
Hakon

Hakon

Regular Member
Messages
245
My Satellite Setup
My setup
Laminas180cm P.M 60e-30w
24" SuperJack,Clark-Tech V-Box
Laminas120cm CM P.M 75e-30w
18" Superjack, Clark-Tech V-Box
Gibertini XP premium 100cm
Polar Mount, 12" Superjack
75e-30w
2 x Vu+ Duo
My Location
Sweden south
Here comes the Golden Interstar GI-50-120
As you can see it says DG-240 on the mainboard
And the maingear are made in plastic, as the spec for the DG-240
You can compare with the Powertech DG-240 here _http://sadoun.com/Sat/Products/PowerTech/Sadoun-DG240_HH_Motor.htm
 

Attachments

rolfw

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,870
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
Thanks Hakon, hopefully in time we can identify which motors come from which companies and which are just rebadged.:)
 
Hakon

Hakon

Regular Member
Messages
245
My Satellite Setup
My setup
Laminas180cm P.M 60e-30w
24" SuperJack,Clark-Tech V-Box
Laminas120cm CM P.M 75e-30w
18" Superjack, Clark-Tech V-Box
Gibertini XP premium 100cm
Polar Mount, 12" Superjack
75e-30w
2 x Vu+ Duo
My Location
Sweden south
Heres the pictures of the Clarke-Tech HH390
Im so sorry for the bad quality, must been "One of those days"
It was suprising of whats inside.Maingear is in steel, the gearbox is made in aluminum.Notice the real bearing in the cover for the mainaxle.It all looks very solid made.The mainboard is the same as the Golden Interstar.
All mountingbolts are made of stainless steel even the U-bolts.
Zero backlash design,no adjust possible, automatic?
 

Attachments

H

HB13DISH

Retired Mod
Messages
3,764
My Location
Middle East - Israel
Thanks Hakon. :)
Would be great to see the inside of a Dark Box also and see if it is related to the Golden Interstar, as suggested by another member (Turok?)
 
G

guest poster

registered
Messages
989
Jaeger's SUPERJACK diseqc motor..(with the correct PCB ...hmm)...

I like the adjustable dial on the back..

edit... BTW... anyone know how to adjust backlash on these ...
 

Attachments

G

guest poster

registered
Messages
989
Fortec Star Turner 2100 clone ... with pcb..

... they do look the same (as the Moteck..)
 

Attachments

rolfw

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,870
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
Thanks for those, can you get a good photo of the main board?
 
G

guest poster

registered
Messages
989
Sorry Rolfw, I would do but all back together now and working 100%...if I get another chance I will ... sorry about the blur - bit rushed ... (I get dishes/lnb's in better focus- honest...:-rofl2)


found one ... had put it on the superjack ..he he ... both done !



Even though the Fortec Star Turner 2100 clone & the Moteck 2100 look like they are from the same blueprint, the quality of parts, production staff/ facilities and final QA could be quite different.
 
rolfw

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,870
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
Thanks. :) Once we get a few of these, we should be able to determine origins of some of these motors.
 
G

guest poster

registered
Messages
989
Hakon said:
Heres the pictures of the Clarke-Tech HH390
Im so sorry for the bad quality, must been "One of those days"
It was suprising of whats inside.Maingear is in steel, the gearbox is made in aluminum.Notice the real bearing in the cover for the mainaxle.It all looks very solid made.The mainboard is the same as the Golden Interstar.
All mountingbolts are made of stainless steel even the U-bolts.
Zero backlash design,no adjust possible, automatic?
Did you have any problems getting the main shaft out of the bearing.. the Superjack wouldn't budge, so to the bearing out with it still on the shaft ..


The Moteck 2100 & Clones (Fortec Turner etc..)

I think there is a weak point between the ali case of the motor and the main gearbox... if you've got one open for maintenance, I say it's worth using a hotmelt fillet between these two or use Araldite etc.. and make sure the bolts are tight on the motor..
 
Top