Dm800hd pvr

qimmy

Member
Joined
Sep 16, 2012
Messages
3
Reaction score
0
Points
0
Age
36
My Satellite Setup
DM800HD PVR
My Location
Kosova
Can somebody help me ?
I have 3 lnb's but i don't know how to configure the tuner . I use a diseqc 2.0 switch 4x1* (4lnb to 1 reciever)
My config.
Configuration mode : Simple
Mode : DiSEQc A/B/C/D
Port A : Eutelsat (15.8E)
Port B : Hotbird (13.0E)
Port C : Astra (19.2E)
Port D : nothing connected
Set voltage and 22Khz : Yes
Send DiSEQc only on satelite change : No
Tone amplitude : 800mV

I only can watch lnb 1 (15.8E)
 

A nonymous

Member
Joined
Sep 24, 2006
Messages
3,586
Reaction score
913
Points
113
Probably a dodgy DISEqC switch. I have a tendency to find that the cheaper DISEqC switches behave in the way you are describing.. What brand of DISEqC switch is it?
 

Hixxy1

Regular Member
Joined
Aug 20, 2012
Messages
457
Reaction score
111
Points
43
My Satellite Setup
DM800/7020Si/7000S, VU+ Duo, Skybox F3 & F5, TM1000D, Skystar 2 DVBdream, Triax TD110, Darkmotor, Inverto Black, Hotbird 13 Zone 2 MK 4, 28.2 Zone 1 MK4
My Location
East Midlands
I also had the same problem with a global switch.
I had to set it to advanced mode and then set each lnb number in the menu.
Each lnb number then got assigned a satellite and disecq setting if that makes sense. It seemed to work after that.
If could also be a dodgy switch causing that as well.
 

qimmy

Member
Joined
Sep 16, 2012
Messages
3
Reaction score
0
Points
0
Age
36
My Satellite Setup
DM800HD PVR
My Location
Kosova
​STARGOLD SG-D50 (made in sweden)
 

qimmy

Member
Joined
Sep 16, 2012
Messages
3
Reaction score
0
Points
0
Age
36
My Satellite Setup
DM800HD PVR
My Location
Kosova
Hixxy1 I also tried with advanced but not working. I tried 3 switches still don't work. the voltage from my dm800 is 18 volt . just lnb1 is working not the others, i think the problem is with voltage. it has no power to open other lnb's
 

pacmyc

Regular Member
Joined
Oct 15, 2008
Messages
94
Reaction score
6
Points
8
Age
49
My Satellite Setup
DM 7000S
Project Gemini 4.40
Nabilosat Darkstar II
My Location
Stockholm
Its a hell to get the Diseqcs switch to work with the DM800. However here is my setup (I hope its unsderstandable, even if its in swedish).
Im using a 4-way EMP-Centuari. The spaun switches are recommended by many proffessionals, but I found it too expensive..
Good luck!

(Im sorry for the text-format, no way to paste tabs into this forum)..

Code:
hotbird 13 Ö Sirius 4.8 Ö Thor 1 W
LNB  1 2 3
Prioritet  auto auto auto
LOF Universal LNB Universal LNB Universal LNB
Späningsläge Polarisation Polarisation Polarisation
ökad spänning nej nej nej
Tonläge Band Band Band
Diseq läge 1.0 1.0 1.0
Toneburst  A A A
Comitted d com. AB AA BA
Snabb DiSeq nej nej nej
repetera sek ja ja ja
kommando ord comitted, toneburst comitted, toneburst comitted, toneburst
ton amplitud 340 mV 340 mV 340 mV
600 600 600
 
Top