Does Diseqc motors degrade the signal?

Likvid

ASBO Club Member - Persona non grata
Joined
Jul 30, 2003
Messages
1,752
Reaction score
5
Points
0
Age
53
My Location
Stockholm, Sweden
As i don't have any real practical knowledge of Diseqc motors i was wondering if the signal degrades when it passes thru the motor?
 

steffan_st

A bit enthusiastic
Joined
Feb 11, 2004
Messages
573
Reaction score
14
Points
18
My Satellite Setup
Gibertini OP 125 L, Smart Titanium lnb with CD-80 feedhorn, Moteck SG-2500, Azbox HD Premium+, some 5 meters of good quality coax
My Location
Sweden
I measured it once by connecting a cable straight from the lnb to receiver,the loss was only 1% pic quality(nothing),but that was at low frequencies at 2d.
Didn't measure on higher frequencies.//
 

Likvid

ASBO Club Member - Persona non grata
Joined
Jul 30, 2003
Messages
1,752
Reaction score
5
Points
0
Age
53
My Location
Stockholm, Sweden
Have you turned down all contact details in your profile? neither PM or mail are enabled.

steffan_st said:
I measured it once by connecting a cable straight from the lnb to receiver,the loss was only 1% pic quality(nothing),but that was at low frequencies at 2d.
Didn't measure on higher frequencies.//
 

steffan_st

A bit enthusiastic
Joined
Feb 11, 2004
Messages
573
Reaction score
14
Points
18
My Satellite Setup
Gibertini OP 125 L, Smart Titanium lnb with CD-80 feedhorn, Moteck SG-2500, Azbox HD Premium+, some 5 meters of good quality coax
My Location
Sweden
PM:s now enabled .
 
Top