- Joined
- May 1, 1999
- Messages
- 38,290
- Reaction score
- 1,615
- Points
- 113
- My Satellite Setup
- Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
- My Location
- Berkshire
Well, I've been playing with one for a couple of hours today and must say that I am impressed with its operation.
Loading the CAM is simple, providing that you have a phoenix programmer and the supplied loader card, you load the file onto the card, put the card in the CAM and then switch on the receiver (on a FTA channel) and go to the CAM menu, it will give you a prompt to press OK and the thing programmes itself.
3 minutes or so and Whammo, cardless emulation, no freezes or pixellation with the Coship receiver.
Will have a further play over the next few days and report.
Loading the CAM is simple, providing that you have a phoenix programmer and the supplied loader card, you load the file onto the card, put the card in the CAM and then switch on the receiver (on a FTA channel) and go to the CAM menu, it will give you a prompt to press OK and the thing programmes itself.
3 minutes or so and Whammo, cardless emulation, no freezes or pixellation with the Coship receiver.
Will have a further play over the next few days and report.