Sab said:
Thanks whatsthis for replying.
I had an idea that this was what needed to be done but could not find anyone who could confirm it.
Whilst I'm on with you, I'm new to DB. I've read a lot of the posts which has left me slightly confused.
1) Do I have to download satellite listings from the net or do they come via satellite.
2) The various cams and encryptions. I understand they have to be loaded into DB.
Is this done via the loader card,or network and how do we transfer them into the DB files?
I have DB500s loaded with Gemini 2.7. Newcamd and Camd3 on computer waiting to be loaded.
Sab
Hi Sab And welcome to dreambox land.
1st of all read the idiots guide in the dreambox section, you may not understand everything but eventually it will click in.
You also need your box set up to the internet 1st.
To answer you questions.
Yes you will have to download satellite settings. You will need to get onto a key site. ie satdudez or crosat which I use.
To load these settings onto dreambox you will need to download flash wizzard pro, Onto your computer by the way.
2- To load up cams, best way for you is via your blue button on the remote. But you must have your internet connection set up.
3- Your gemeni image on the computer must be a loaded one so therefore you dont need to load cams you may just need to put in keys. Another thing It should be loaded with the sat settings as well.
You need flash wizzard pro to load this image onto your dreambox as well.
So to recap read the Idiots guide (written by the dreambox idiots here, Not me because Im a muppet and havent been upgraded to idiot yet).
Set up your ip add In the communications panel, and connect your computer with your dreambox via crossover cable. You have to get this right 1st before you do anything. Then download your flash wizzard. Put in your ip add into the settings. Then load your image to the dreambox.
Im sure you will have loads of questions, so get cracking.