Enigma 2 fails to start

jtropu

New Member
Joined
Feb 19, 2014
Messages
4
Reaction score
0
Points
1
Age
40
My Satellite Setup
Orly target board (STiH416), Enigma2
My Location
France
Hi,

I have some trouble to run enigma 2 :

- A lot of errors occured (it seems that some interfaces are missing on my target board).
- enigma crash at the end

Do you know the list of required services to get back something on screen ?
What are the most critical errors to fix ?

Could you help me please ?

Here is a small log of enigma2

Thanks in advance,

Code:
PYTHONPATH: /usr/local/lib/enigma2/python:/usr/local/lib/python2.7:/usr/local/lib/python2.7/lib-dynload:/usr/lib/python2.7/:/usr/lib/python2.7/lib-dynload
+ (30) eActionMap
+ (1) Background File Eraser
+ (20) RC Input layer
+ (21) input device driver
+ (21) Console RC Driver
+ (20) AVSwitch Driver
+ (20) UHF Modulator
+ (20) misc options
+ (21) LIRC RC Driver
+ (35) CI Slots
+ (20) DVB-CI UI
+ (10) gRC
+ (9) Font Render Class
+ (9) GFBDC
+ (9) gLCDDC
+ (8) graphics acceleration manager
+ (15) eWindowStyleManager
+ (40) eServiceCenter
+ (41) eServiceFactoryDVB
+ (41) eServiceFactoryFS
+ (1) Background File Eraser
+ (8) graphics acceleration manager
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (9) GFBDC
resolution read out from fb: 1920 x 1080

16220kB available for acceleration surfaces.
resolution: 1920 x 1080 x 32 (stride: 7680)
+ (9) gLCDDC
couldn't open LCD - load lcd.o!
The interface /dev/dbox/lcd0 doesn't exist on my target board.

Code:
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) RC Input layer
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
Enigma try to open the following file (without succes) :
/proc/stb/fp/lnb_sense%d", m_slotid)

The it try to listen the interface associated to the front processor. The interface doesn't exist on my target board.
// open
int fp=::-ohmypen("/dev/dbox/fp0", O_RDWR);

Code:
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
The interface doesn't exist on the target board.

Code:
+ (20) misc options
+ (20) DVB-CI UI
+ (21) input device driver
Found 0 input devices!
+ (21) Console RC Driver
failed to open /dev/vc/0
The interface doesn't exist on the target board.

Code:
+ (21) LIRC RC Driver
[elirc] open [f:/dev/lirc0] [h:8]
[elirc] #error# cannot connect to lirc
The interface exist yet and the process /usr/sbin/lircd has been started. est bien lancé. I haved notice the following stack trace in my kernel log
« [ 753.000000] lirc-stm: IR RX overrun »

Code:
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input0
cannot open /proc/stb/tsmux/input1
done, found 0 common interface slots
The interface doesn't exist on the target board.

Code:
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVB
+ (41) eServiceFactoryFS
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 2945 services
scanning for frontends..
opening frontend 0
detected terrestrial frontend
close frontend 0
opening frontend 1
detected terrestrial frontend
close frontend 1
opening frontend 2
detected terrestrial frontend
close frontend 2
opening frontend 3
detected terrestrial frontend
close frontend 3
opening frontend 4
unknown frontend type.
unknown frontend type.
opening frontend 5
unknown frontend type.
unknown frontend type.
opening frontend 6
unknown frontend type.
unknown frontend type.
found 1 adapter, 4 frontends(4 sim) and 8 demux
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache
[EPGC] time updated.. start EPG Mainloop
Loading spinners...
found 4 spinner!

executing main
setIoPrio best-effort level 3 ok
=>initTvui()
[FONT] adding font /usr/local/lib/seashell/Vera.ttf...OK (abalone-sans)
[FONT] adding font /usr/local/lib/seashell/VeraBd.ttf...OK (abalone-sans-bold)
Server: connect from
couldn't open fp
The interface doesn't exist on the target board.

Code:
enumerating block devices...
found block device 'sda': ok, removable=True, cdrom=False, partitions=['sda1'], device=sda
found block device 'ram0': ok, removable=False, cdrom=False, partitions=[], device=ram0
found block device 'ram1': ok, removable=False, cdrom=False, partitions=[], device=ram1
found block device 'ram2': ok, removable=False, cdrom=False, partitions=[], device=ram2
found block device 'ram3': ok, removable=False, cdrom=False, partitions=[], device=ram3
found block device 'ram4': ok, removable=False, cdrom=False, partitions=[], device=ram4
found block device 'ram5': ok, removable=False, cdrom=False, partitions=[], device=ram5
found block device 'ram6': ok, removable=False, cdrom=False, partitions=[], device=ram6
found block device 'ram7': ok, removable=False, cdrom=False, partitions=[], device=ram7
found block device 'ram8': ok, removable=False, cdrom=False, partitions=[], device=ram8
found block device 'ram9': ok, removable=False, cdrom=False, partitions=[], device=ram9
found block device 'loop0': blacklisted
found block device 'loop1': blacklisted
found block device 'loop2': blacklisted
found block device 'loop3': blacklisted
found block device 'loop4': blacklisted
found block device 'loop5': blacklisted
found block device 'loop6': blacklisted
found block device 'loop7': blacklisted
found block device 'ram10': ok, removable=False, cdrom=False, partitions=[], device=ram10
found block device 'ram11': ok, removable=False, cdrom=False, partitions=[], device=ram11
found block device 'ram12': ok, removable=False, cdrom=False, partitions=[], device=ram12
found block device 'ram13': ok, removable=False, cdrom=False, partitions=[], device=ram13
found block device 'ram14': ok, removable=False, cdrom=False, partitions=[], device=ram14
found block device 'ram15': ok, removable=False, cdrom=False, partitions=[], device=ram15
found block device 'mtdblock0': blacklisted
found block device 'mtdblock1': blacklisted
found block device 'mtdblock2': blacklisted
found block device 'mtdblock3': blacklisted
found block device 'mtdblock4': blacklisted
found block device 'mtdblock5': blacklisted
sec config cleared
Traceback (most recent call last):
File "/usr/local/lib/enigma2/python/mytest.py", line 28, in <module>
import Screens.InfoBar
File "/usr/local/lib/enigma2/python/Screens/InfoBar.py", line 12, in <module>
from Screens.InfoBarGenerics import InfoBarShowHide, \
File "/usr/local/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1, in <module>
from ChannelSelection import ChannelSelection, BouquetSelector
File "/usr/local/lib/enigma2/python/Screens/ChannelSelection.py", line 10, in <module>
from EpgSelection import EPGSelection
File "/usr/local/lib/enigma2/python/Screens/EpgSelection.py", line 8, in <module>
from Screens.TimerEdit import TimerSanityConflict
File "/usr/local/lib/enigma2/python/Screens/TimerEdit.py", line 6, in <module>
from Components.TimerSanityCheck import TimerSanityCheck
File "/usr/local/lib/enigma2/python/Components/TimerSanityCheck.py", line 4, in <module>
from Components.NimManager import nimmanager
File "/usr/local/lib/enigma2/python/Components/NimManager.py", line 1043, in <module>
nimmanager = NimManager()
File "/usr/local/lib/enigma2/python/Components/NimManager.py", line 623, in __init__
InitNimManager(self) #init config stuff
File "/usr/local/lib/enigma2/python/Components/NimManager.py", line 1041, in InitNimManager
nimmgr.sec = SecConfigure(nimmgr)
File "/usr/local/lib/enigma2/python/Components/NimManager.py", line 394, in __init__
self.update()
File "/usr/local/lib/enigma2/python/Components/NimManager.py", line 127, in update
eDVBResourceManager.getInstance().setFrontendSlotInformations(used_nim_slots)
StandardError: eDVBResourceManager::setFrontendSlotInformations list size incorrect 4 frontends avail, but 0 entries in slotlist
=>exitTvui()
---- saving lame channel db [/local/etc/enigma2/lamedb]
saved 156 channels and 2945 services!
release cached channel (timer timeout)
[EPGC] 0 events written to /hdd/epg.dat
set RTC to previous valid time
+ (30) eActionMap
+ (1) Background File Eraser
+ (20) RC Input layer
+ (21) input device driver
+ (21) Console RC Driver
+ (20) AVSwitch Driver
+ (20) UHF Modulator
+ (20) misc options
+ (21) LIRC RC Driver
+ (35) CI Slots
+ (20) DVB-CI UI
+ (10) gRC
+ (9) Font Render Class
+ (9) GFBDC
+ (9) gLCDDC
+ (8) graphics acceleration manager
+ (15) eWindowStyleManager
+ (40) eServiceCenter
+ (41) eServiceFactoryDVB
+ (41) eServiceFactoryFS
- (41) eServiceFactoryDVB
- (41) eServiceFactoryFS
- (40) eServiceCenter
clear instance
- (35) CI Slots
- (30) eActionMap
- (21) input device driver
- (21) Console RC Driver
- (21) LIRC RC Driver
- (20) RC Input layer
- (20) AVSwitch Driver
- (20) UHF Modulator
- (20) misc options
- (20) DVB-CI UI
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
KILLED BY signal 11
-------
Segmentation fault
 

Huevos

Satellite Freak
Joined
Sep 11, 2008
Messages
6,036
Reaction score
1,273
Points
113
My Satellite Setup
57E to 58W, C-band and Ku, DVB-S2, 4:2:2 and blindscan.
My Location
38.5ºN, 0.5ºW
What receiver and image?
 

jtropu

New Member
Joined
Feb 19, 2014
Messages
4
Reaction score
0
Points
1
Age
40
My Satellite Setup
Orly target board (STiH416), Enigma2
My Location
France
Thank you for your quick response.

Receiver: the target system is the ST Orly (STiH416).
Image: I'm not sure to understand the meaning of this. The output screen is an HDMI TV screen (1920x1080).

Thanks in advance for your help,
 

smoggy07

Regular Member
Joined
Aug 20, 2008
Messages
945
Reaction score
384
Points
63
Age
40
My Satellite Setup
Sky minidish and Sky + HD 250gig Anytime+ box with full ish appart from sports and movies, Dreambox DM500s clone (Pli Jade3 max var F/W), Motorised 1.1Meter Dish
My Location
middlesbrough, teesside, northeast coast, uk
what software/firmware is on the box? (this is known as the image)
 

jtropu

New Member
Joined
Feb 19, 2014
Messages
4
Reaction score
0
Points
1
Age
40
My Satellite Setup
Orly target board (STiH416), Enigma2
My Location
France
Thank you for your help.

With reference to the list of software/firmware in the box, all information are provided in the first page of the following pdf:

Code:
http:// www.bdtic.com/DownLoad/ST/STiH416.pdf
 
Last edited by a moderator:

A nonymous

Member
Joined
Sep 24, 2006
Messages
3,586
Reaction score
913
Points
113
All that tells us is the receiver is based around the Sti Orly CPU, nothing else.

What is the Make and model of the receiver. It should be written on the receiver somewhere. Failing that take a photo of it
 

jtropu

New Member
Joined
Feb 19, 2014
Messages
4
Reaction score
0
Points
1
Age
40
My Satellite Setup
Orly target board (STiH416), Enigma2
My Location
France
Thank you for your response.

Components of Orly : HDMI(in/out), S/PDIF output, smarcard reader, emmc reader, ethernet, USB, CVBS, analog audio, NIM3, ir remote sensor

Enigma is really specific to dreambox. Kernel and components of the ST Orly platform are really different from dreambox's component and kernel.

So, I'll have to wring Enigma or use another software.
 

digi247

Regular Member
Joined
Mar 24, 2009
Messages
722
Reaction score
429
Points
63
Location
NW
My Satellite Setup
see sig
My Location
UK
Your trying to run Enigma2 on an STi chipset i think for this sort of problem you need to speak to an E2 dev that could point you in the right direction, Anyone on here know about E2 at coding level from scratch because by the looks of it thats whats needed here.
 
Top