RustySpoons
Sleepy Hollow
- Joined
- Jan 31, 2018
- Messages
- 2,345
- Reaction score
- 1,278
- Points
- 113
- Age
- 42
- My Satellite Setup
-
50E - 30W
2x CM 1.2m Polar Mount/Jack
65E- 65W
Gibertini 1m OP100 - STAB HH100 - Inverto Black Ultra 0.2 Twin
Mutant HD51
Edision Primo IP S2
Dreambox DM800HD
Venton Unibox HD2
Sony Bravia 55" 4K
- My Location
- South Wales
So I've got my Mutant HD51 and I cannot fathom how to do something I think is quite simple but configuration of this is proving to be problematic.
Basically I want to do the following:
Tuner A > Stab HH100 > Output 1 on Twin IBU
Tuner B > Diseqc 2 Port switch > Port 1 > Output 2 on Twin LNB
> Port 2 > 28.2 Fixed dish
I want tuner B setup as "Second cable of motorised LNB" but has the 28.2 Fixed dish as well. However there are no Diseqc settings for the switch using this setting
in Enigma2.
How can I achieve the above?
Also I have the CM1.2 on a VBOX II which is connected to my Edision Primo IP S2, I did think about getting this on the Mutant HD 51 somehow, but that just seems an extremely complicated way. Initially I tried using it direct on the HD 51 and using the loop/pass through to connect the Edision but it had far too much signal loss and negates the point of having the CM1.2 up (Feed hunting and more margin on some weak birds)
At the moment I've just left that on the Edision, because I don't want to introduce any signal loss. But it would be nice to have that CM1.2 & Gibby on both boxes. I was going to order a IBU Twin for the CM1.2 but have just left the IBU Single on there for now.
Basically I want to do the following:
Tuner A > Stab HH100 > Output 1 on Twin IBU
Tuner B > Diseqc 2 Port switch > Port 1 > Output 2 on Twin LNB
> Port 2 > 28.2 Fixed dish
I want tuner B setup as "Second cable of motorised LNB" but has the 28.2 Fixed dish as well. However there are no Diseqc settings for the switch using this setting
in Enigma2.
How can I achieve the above?
Also I have the CM1.2 on a VBOX II which is connected to my Edision Primo IP S2, I did think about getting this on the Mutant HD 51 somehow, but that just seems an extremely complicated way. Initially I tried using it direct on the HD 51 and using the loop/pass through to connect the Edision but it had far too much signal loss and negates the point of having the CM1.2 up (Feed hunting and more margin on some weak birds)
At the moment I've just left that on the Edision, because I don't want to introduce any signal loss. But it would be nice to have that CM1.2 & Gibby on both boxes. I was going to order a IBU Twin for the CM1.2 but have just left the IBU Single on there for now.
Last edited: